Operation Manual

11
Edox 26, 27
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
3. Time setting: hours and minutes. Pull
the crown out to position 3. Turn the
crown forwards or backwards. Push the
crown back to position 1.
Edox 34
Watch functions:
The crown has 4 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
4. Correcting the day: pull the crown
out to position 3. Turn the crown forwards
until the hands pass midnight. Repeat this
operation until the desired day is reached.
Edox 48
Watch functions:
The crown has 5 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
4. Setting the tide position: press the but-
ton B more than 3 seconds and after the
“bip”, release it and press again to adjust to
the local tide stage. 3 seconds after releas-
ing the button B, a “bip” will be audible to
confirm the setting.
5. Setting the tide range: press the but-
ton A more than 3 seconds and after the
“bip”, release is and press again to adjust
to the moon phase. 3 seconds after re-
leasing the button A, a “bip” will be audi-
ble to confirm the setting.
Edox 60, 63, 70, 86
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
(backwards for references 86) and push it
back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
crown back to position 1 to coincide with
a given time signal.
Edox 62
Watch functions:
The crown has 4 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
4. Correcting the dual time (GMT): pull
the crown A out to position B. Turn the
crown forwards or backwards to reach the
requested time and push it back to posi-
tion A.