User manual
Conguring the USB Settings (Windows 7 and Windows XP)
OTE:N The USB settings only need to be configured once. If you have already configured the USB settings,skip this section.
1. Click the Windows Start button. Then right-click Computer/My Computer and select Properties.
2. Click Device Manager.
Result: Device Manager opens.
3. Scroll down in the Device Manager window and locate the Universal Serial Bus (USB) controllers.
4. Click the small arrow () or plus sign (+) to the left of the Universal Serial Bus (USB) controllers folder to display
the les.
5. For each USB Root Hub, click to select the device, then right-click and choose Properties.
Expanded USB Hub folder
USB Root Hub properties
6. Click the Power Management tab and uncheck the
box to "Allow the computer to turn o this device to
save power."
7. Click OK to save changes.
Power Management tab
8. Perform steps 5…7 for each USB Root Hub.
9. When nished, close the Device Manager window.
The ORION Endpoint Utility software is ready to use.
Installing the Software
Page 61 February 2015 ORI-UM-00019-EN-04