User manual

Follow this procedure for programming an RTR endpoint to the odometer setting.
1. On the IR
programming screen,
double-click in the
Current Reading eld
to select the current
read value.
Figure 22: Current Reading field
2. Using the keyboard,
enter the RTR
odometer value
in the Current Reading
eld.
Result: The eld
background is
highlighted to indicate
an unprogrammed
value has been entered.
Figure 23: Current Reading field highlighted
Align the optical head
of the IR cable with
the endpoint IR LED
port and click the
Program button.
Hold the optical head
of the IR cable steady.
The endpoint is
programmed when
the Current Reading
eld background
clears.
Figure 24: Current Reading field programmed
OTE:N The Status Indicators are also updated to show Index Changed and Endpoint Programmed.
IR Programming
Page 24 February 2015ORI-UM-00019-EN-04