User manual
SETTINGS
Before you begin using the software application, use the Settings function to set the COM ports for the equipment attached
to the computer.
Figure 11: Settings screen for COM ports
MPORTANTI
If using an ORION mobile transceiver, make sure the ME driver is installed and the USB driver is configured according to the
instructions. See "Installing the ME Driver" on page53 and "Configuring the USB Settings (Windows 7 and Windows XP)" on
page61 for complete information.
Follow these steps to set the COM ports on the Setting screen.
1. On the main menu, click the Settings button to open the Settings screen.
2. Click the Change button to open the COM port selection window for the hardware attached to the laptop.
For this example, the ORION ME RF COM Change button is selected. This button is used to select the COM port for the
ORION mobile transceiver.
3. Choose the COM port that was shown on the laptop
Device Manager screen for the mobile transceiver.
See "COM Ports" on page10 for more information.
Then click Select.
Figure 12: ORION ME RF COM port
Settings
Page 13 February 2015 ORI-UM-00019-EN-04