Installation guide

 %
*!
%+-
"

 
»Note:
Printer performance depends upon the type of computer to which you connect
it. We recommend a Pentium-class computer with at least 16 MB of RAM (if you’re
using Windows 95/98) or 32 MB of RAM (if you’re using Windows NT 4.0).

1 Using a Centronics IEEE 1284 bidirectional
parallel cable, connect the parallel port on the
printer to the parallel port on the PC.
If you’re replacing a printer already connected to a
PC, you probably already have a parallel cable. If
not, contact your local vendor or computer store.
Also, see appendix B, “Technical Specifications,” of
the
User’s Guide for detailed information on
PC-to-printer cabling.
2 Plug the printer into a grounded, surge-pro-
tected, electrical outlet.
»Note:
In compliance with UL guidelines, “The
appliance inlet is considered to be the main
disconnect device.”
3 Turn the printer on to test that it works, and then turn it off again.
!!!

EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]