Installation guide

$ %
 
15 Pull the top latch to release the top
cover, and then open the top cover.
 Caution: If you have a duplex model,
make sure you have opened the
duplexer’s rear cover before opening
the top of the printer. Forced opening of
the top cover first may damage the unit.
16 Remove any packing material from
inside the printer.
17 Remove the orange shipping
spacers from between the fuser
rollers.
 Caution: It’s very important to remove
both shipping spacers.
»Note: Save the spacers in case you
need to repack the printer for relocation
or shipping later.
18 Close the printer’s front and top covers.
19 If you have a duplex model, close the
duplexer’s rear cover.
20 Remove the media cassette, and then
remove any packing material from the
cassette.
21 Slide the media cassette back into the
printer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]