Installation guide



 


 Away from cooling and heating sources, extreme temperature changes, direct
sunlight, excessive dust, corrosive chemicals or vapors (such as ammonia), water
pipes, refrigerators, and any strong electromagnetic field (such as that created by
an air conditioner).
 Away from items that can easily burn (such as curtains) and items that produce
excessive vibration.
 In an area with a temperature range of 50°–90.5° F (10°–32.5° C) and relative
humidity range of 20%–80%.
 At an altitude of 0–8202' (0–2500 m).
 On a hard, flat, level surface capable of supporting the printer with consumables.
 Caution: For best output quality and longest consumables life, install the printer
on a hard, flat, level (within 1.5°) surface capable of supporting about 110 lbs (50
kg) for the DeskLaser or 126 lbs (57.1 kg) for the Duplex Model. A surface can be
tested for levelness with a standard round pencil. If the pencil rolls, the surface is
not level. Clear the area of any obstruction or items such as cables that might
prevent the printer from sitting directly on the flat, level surface.
 Near your computer—6.5' (2 m) or less for a Centronics IEEE 1284 bidirectional
parallel connection; cables for other connections may be longer.
 Close to an easily accessible power supply. Don’t connect it to the same electrical
outlet as noise-generating equipment.
 In a well-ventilated room.
 With enough space to allow adequate ventilation and easy servicing.
Printer Weight with Consumables and Media
DeskLaser 110 lb (50 kg)
Duplex Model 126 lb (57.1 kg)
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]