Specifications

Cleaning the
Printer
QMS magicolor 2 Op
eration5-10
Cleaning the Laser Lens
It’s necessary to clean the laser lens only when you find vertical white
or light-color streaking in all primary colors on your printouts.
» Note:
A dry cotton cloth or dry cotton swab is required for this
procedure.
1 Open the printer’s front cover.
2 Remove the four toner cartridges.
3 Remove the laser lens.
Use the two tabs on top of the
lens.
4 Using a dry cotton cloth, wipe
the lens.
5 Reinstall the laser lens.
It slides in at a 45° angle.
6 Reinstall the four toner car-
tridges.
7 Close the printer’s front cover.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]