Specifications

Color Density
QMS magicolor 2 Op
eration4-10
4 Compare the calibration page to
the four calibration cards that
were provided with your printer.
Each card features a single color—
cyan, magenta, yellow, or black.
a Place the calibration page on a sheet of clean white paper in
a well-lighted area.
b Align the cutout in the cyan color
calibration card over the cyan
column on the calibration page.
c Decide which block on the calibration page most closely
matches the cyan color calibration card.
» Note:
It may be easier to decide which colors match if you
view the output at a distance (3–4 feet) and squint.
d Make a note of the value (-4 to +4) associated with that block,
or simply mark the pane through the cutout in the card.
You will need this value in step 6.
e Repeat steps b–d with the magenta, yellow, and black
calibration cards.
5 Access the printer’s Administration/Engine/Density/Cyan
menu.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]