Specifications

Remove Cables
and Cassette(s)
9-3Repacking the Printer
Remove Cables and Cassette(s)
» Note: If you’re returning the printer for service, you don’t need to
return the power cable, interface cables, or media cassette(s).
1 Turn off the printer.
2 Remove the power cable and all interface cables.
3 Remove the media cassette(s) from the printer.
Remove the Toner Cartridges
1 Open the printer’s front and top covers.
Leave them open during the entire repacking procedure.
2 Remove the four toner cartridges, attach the protective
shields over their magnetic rollers, and repackage them in
their original packaging.
Remove the OPC Belt Cartridge
s Caution: The OPC belt is extremely sensitive to bright light and direct
sunlight. Limit exposure to 2 minutes. While the printer is being moved,
store the cartridge in its original shipping bag. If you don’t have this
bag, carefully wrap it in a piece of dark, heavy cloth, and place it where
it will not get scratched or damaged. If exposure exceeds 2 minutes,
put the cartridge in a dark place to recover before using it again.
Depending on exposure, recovery may take up to 2 hours.
Also, handle the OPC belt cartridge carefully. The belt’s extremely
sensitive to body oils, moisture, solvents, corrosives, dust, and
scratches, all of which will reduce print quality.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]