Specifications

Introduction
QMS magicolor 2 Op
eration2-2
Introduction
This chapter covers basic printer operation, such as loading paper,
transparencies, labels, and envelopes; and replacing toner cartridges.
Loading the Media Cassette
Prepare the Paper
1 Take a stack of about 250 sheets (
½ ream).
» Note:
Don’t unwrap the paper above the printer as this might
cause paper particles to fall into the printer.
2 Holding the stack with one hand, fan the paper with the other.
This gets air through the sheets and prevents static buildup.
3 Take off the top and bottom sheets.
Residual glue buildup on these sheets may cause media jams.
Load the Cassette
1 Remove the media cassette from the printer.
2 Adjust the media guides to fit the size paper you’re loading.
Squeeze the retainers at the ends of the left width guide and/or
the length guide, move the guide to the appropriate location
(media sizes are listed on the cassette), and release the retainers.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]