Specifications

Testing
Macintosh-Printer
Communication
QMS magicolor 2 Op
eration8-18
Verifying the Serial Setting Changes
1 Turn the printer off and on again to produce a start-up page.
2 Compare the serial port settings listed on the start-up page
to those in your AUTOEXEC.BAT file.
3 Try the communication test again.
If a blank page ejects from the printer, the printer and the PC are
communicating. If a blank page doesn’t eject and you typed the file
correctly, refer to your DOS documentation for more information.
Testing Macintosh-Printer
Communication
Testing Macintosh Communication
You can check communication between the printer selected in the
Chooser and the Macintosh by sending a file to the printer from an
application (see your application documentation for more information)
or by printing a directory, as described here:
1 Display a disk or folder window.
Online/
Offline
Access the Save Changes option. SAVE CHANGES?
*NO
Next Advance to the Yes option. SAVE CHANGES?
YES
Select Save changes. IDLE
Online/
Offline
Put the printer back on line (the
Ready indicator lights).
IDLE
Press this
key...
to... The message window
reads...
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]