Specifications

Status and
Service Messages
QMS magicolor 2 Op
eration8-8
PRINTING STATUS A status page is printing Wait until after the
status page prints,
and the message
clears.
PUT
SIZE
PAPER IN
INPUTBIN
BIN
The Operator Control/
Chain Inputbins is set to
Off and the displayed
cassette is empty. Refill it
with the specified size
media.
SIZE
is the media
size detected by the
engine, and
INPUTBIN
is
the empty cassette.
Refill the cassette
with the specified
size media.
PUT
SIZE
PAPER IN ANY
BIN
Operator Control/Chain
Inputbins is set to On and
a chained cassette is
empty.
Refill the cassette
with the specified
size media.
REPLACE BELT The OPC belt cartridge
need replacing.
Install a new belt
cartridge.
RESETTING ACCOUNTING The reset accounting
operation is in process.
No action needed.
SCAN ERROR There may be insufficient
memory to scan the
document from the
scanner’s automatic
document feeder (ADF).
There may be a media
jam in the ADF.
Add a hard disk,
enable disk swap-
ping, and/or
increase Display
List memory. (Refer
to the ADF scan-
ning section in
chapter 7, “Crown-
Copy,” of the
Options
manual.)
Remove the media
jam.
This status message... means... Do this...
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500