Specifications

Status and
Service Messages
8-7Troubleshooting Printer Problems
FUSER OIL LOW The oil bottle for the fuser
unit is running low.
If you have a new
fuser oil bottle on
hand, you may
want to install it
now. If you don’t,
order one now. A
limited number of
copies (about 100)
will still print.
However, when the
oil runs out, the
printer stops and
the FUSER OIL
EMPTY message
appears.
IDLE The printer is on line, but
no jobs are in process.
No action needed.
INITIALIZING The printer is warming up
and getting ready to go on
line.
Wait. No other
action needed.
INNER JAM Media has jammed
leaving the OPC belt
cartridge area.
Locate and remove
the jam.
INPUT IDLE
PRINTING
The printer is on line and
printing jobs already in
the queue. No new jobs
are arriving at the
communication
interfaces.
No action needed.
OUTPUTBIN OUTPUTBIN
JAM
Media has jammed
between the print engine
and the specified tray.
Locate and remove
the jam.
This status message... means... Do this...
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]