User`s guide

magicolor 8650 4-7
Installing the printer driver for Windows
4
8 Click the [Next] button.
9 In the "Printer Name or IP address" box, enter the IP address for this machine, and then click the [Next]
button.
– If the Additional Port Information Required dialog box appears, go to step 10.
– If the Finish dialog box appears, go to step 13.
10 Select "Custom", and then click the [Settings] button.
11 Change the settings according to the port, and then click the [OK] button.
– For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
– For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
– The information entered here is case-sensitive.
12 Click the [Next] button.
13 Click the [Finish] button.
The Add Printer Wizard appears.
14 Click the [Have Disk] button.
15 Click the [Browse] button.
16 Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
button.
– Select the specified folder according to the printer driver to be used, the operating system, and the
language.
Printer drivers that can be selected:
Windows XP/Server 2003: PCL driver, PS driver
17 Click the [OK] button.
The "Printers" list appears.
18 Click the [Next] button.
19 Follow the on-screen instructions.
– If the Windows Logo Testing or Digital Signature dialog box appears, click the [Continue] or [Yes]
button.
– When using a network connection, perform a test print after the network settings have been
specified.
20 Click the [Finish] button.
21 When installation is complete, make sure that the icon of the installed printer appears in the Printers
and Faxes window.
22 Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
EDNord - Istedgade 37A - 900 Aalborg - telefon [phone]