User`s guide

Printing With NetWare102
Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
Mode: Select PServer.
Print Server Name: Specify the print server name created in step
4.
Print Server Password: Specify only when setting from the Net-
Ware server.
Print Queue Scan Rate: Specify 1. (Change as necessary.)
Bindery/NDS: Select NDS.
Preferred NDS Context Name:
Specify the name of the context that connects to Pserver.
Preferred NDS Tree Name:
Specify the name of the tree that Pserver logs on to.
6 Restart the printer (turn the printer off, then on again).
7 Use the NetWare server console to load MONITOR.NLM.
8 Select the connection information and, in the active connection column,
check that the created Pserver is connected.
For NetWare 5.x/6 Novell Distributed Print Service
(NDPS)
" Before specifying settings for NDPS, check that the NDPS broker and
NDPS manager have been created and loaded.
" Also, before performing the following procedure, check that the TCP/
IP protocol has been set in the NetWare server, and check that the IP
address has been set for this machine and that this machine is on.
1 Log on to NetWare as an administrator from a client computer.
2 Start up NWadmin.
3 Right-click the organization or organizational unit container where you will
create the printer agent, and then click NDPS Printer on the Create sub-
menu.
4 In the NDPS Printer Name box, enter the printer name.
5 In the Printer Agent Source column, select Create a New Printer
Agent, and then click the Create button.
6 Check the printer agent name, and then in the NDPS Manager Name
box, browse through the NDPS manager names, and register one.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500