magicolor 7450 ® Reference Guide 4039-9564-02A 1800807-001C EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Copyright Notice The digitally encoded software and publication included with your printer are Copyrighted © 2005 by KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan. All Rights Reserved. This software may not be reproduced, modified, displayed, transferred, or copied in any form or in any manner or on any media, in whole or in part, without the express written permission of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
SOFTWARE LICENSE AGREEMENT This package contains the following materials provided by Konica Minolta Business Technologies, Inc. (KMBT): software included as part of the printing system, the digitally-encoded machine-readable outline data encoded in the special format and in the encrypted form (“Font Programs”), other software which runs on a computer system for use in conjunction with the Printing Software (“Host Software”), and related explanatory written materials (“Documentation”).
11. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S. Government End Users acquire the Software with only those rights set forth herein. 12.
4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis. Adobe makes no representation as to the adequacy of the Software for any particular purpose or to produce any particular result. Adobe shall not be liable for loss or damage arising out of this Agreement or from the distribution or use of the Software or any other materials.
9. GOVERNING LAW This Agreement will be governed by and construed in accordance with the substantive laws in force in the State of California as such laws are applied to agreements entered into and to be performed entirely within California between California residents. This Agreement will not be governed by the conflict of law rules of any jurisdiction or the United Nations Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded.
5. All company names and product names used in this document is the trademarks or registered trademarks of their respective holder. This ICC Profile made by GretagMacbeth ProfileMaker and granted TOYO INK certain license to distribute by GretagMacbeth AG. TOYO Offset Coated 2.1 © TOYO INK MFG. CO., LTD. 2004 OpenSSL Statement OpenSSL License Copyright ©1998-2003 The OpenSSL Project. All rights reserved.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright ©1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Part 6: Cisco/BUPTNIC copyright notice (BSD) Copyright ©2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved.
Contents 1 Operation on Mac OS X ....................................................................................
Paper Handling 31 ColorSync 32 Cover Page 32 Error Handling 33 Paper Feed 34 Color Options 35 Advanced Color Options/Image 36 Advanced Color Options/Text 37 Advanced Color Options/Graphics 38 Advanced Color Options/Simulation 40 Printer Features 41 Summary 42 Troubleshooting 43 2 Operation on Mac OS 9 ...................................................................................
Specifying Printer Driver Settings 82 Displaying the Settings Page 82 Printer Driver Settings 83 Extra 83 General 83 Graphics Options 84 Image Options 85 Options Installed 85 Simulation 86 Text Options 86 Banners 87 Printing a Document 88 Example Using LPR Command 88 Example Using OpenOffice 89 Checking Print Jobs 92 Troubleshooting 93 4 Operation on NetWare ....................................................................................
Making the Connection 117 Ethernet Interface 117 Using DHCP 117 Setting the Address Manually 119 Network Printing 123 AppleTalk 123 Bonjour 123 BOOTP 123 DHCP 124 DDNS (Dynamic DNS) 124 HTTP 124 IPP 124 IPX/SPX 125 LPD/LPR 125 NetBEUI 125 SLP 125 SNMP 126 Port 9100 126 SMB 126 SMTP 126 Printing via IPP (Internet Printing Protocol) – Windows Server 2003/XP/ 2000 127 Adding an IPP Port using Add Printer Wizard 127 Troubleshooting 129 8 Using Crown Print Monitor+ ..............................................
System Page 146 Summary (previous page) 147 Device Information 148 Detail 149 Counter 156 Online Assistance 157 Job Page 158 Active Job List (shown above) 158 Done Job List 159 Done Job List (Detail) 160 Print Page 161 Default Settings 161 Download Font/Form 170 Report Types 174 Direct Print 175 Configuring the Printer 176 System Page 176 Date/Time 176 Admin Password 178 Device Information 180 ROM Version 183 Online Assistance 184 Maintenance 186 Print Page 191 Local Interface 191 Default Settings 192 Downl
Log Accounting Page 248 Job (shown above) 248 vi Contents EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Operation on Mac OS X EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the following system requirements. Computer Apple Macintosh computer installed with the following processor: – PowerPC G3 or later processor (PowerPC G4 or later is recommended) – Intel Core Duo or later processor 2 Connecting the computer and printer USB connection, network connection (10Base-T/100Base-TX/1000Base-T) Operating system Mac OS 9.2 or later Mac OS X 10.
Installing the Printer Driver " " You must have administrator privileges in order to install the printer driver. Before proceeding with the installation, be sure to exit all running applications. Installing the magicolor 7450 Printer Driver " 1 2 The procedure for installing the printer driver on Mac OS X 10.4 is described below. The following procedure or some steps may be different depending on the version of the operating system being used.
4 4 Check the Read Me information, and then click Continue. 5 Check the details of the license agreement, and then click Continue. 6 Click Accept if you agree to the terms of the license.
7 Select a destination volume to install the Driver, and then click Continue. 8 Click Install.
9 Enter the administrator user name and password in the Authenticate dialog box, and then click OK. The installer for the printer driver starts up. 10 After the installation has been completed, click Close. This completes the installation of the magicolor 7450 printer driver.
Printer Setup Utility Settings When Using a USB Connection 1 2 3 Use a USB cable to connect the printer to your computer and check that the printer is turned on. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add. The detected printer appears in the Printer Browser.
4 Select magicolor 7450 in the Printer Browser. " 5 6 8 If magicolor 7450 does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA mc7450 PPD is selected in the Printer Using list. Click Add.
The new printer appears in the Printer List screen.
When Using a Network Connection The network connection settings can be specified in one of several ways: Bonjour Setting, AppleTalk setting, IP printing setting (IPP, LPD or Socket). Bonjour Setting 1 2 3 Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add. The detected printer appears in the Printer Browser.
4 Select KONICA MINOLTA magicolor 7450(xx::xx:xx) in the Printer Browser. " "xx:xx:xx" refers to the last six digits of the MAC address (in hexadecimal). 5 6 Check that KONICA MINOLTA mc7450 PPD is selected in the Print Using list. Click Add.
7 8 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit and Duplex Unit according to your printer setup. Click Continue. The new printer appears in the Printer List screen. AppleTalk Setting 1 2 12 Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities.
3 In the Printer List, click Add. The detected printer appears in the Printer Browser.
4 5 6 Select magicolor 7450 in the Printer Browser. Check that KONICA MINOLTA mc7450 PPD is selected in the Printer Using list. Click Add. The new printer appears in the Printer List screen.
7 Click Add.
IP Printing Setting 1 2 3 4 16 Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List. Click IP Printer.
5 Select desired print protocol from the Protocol pop-up menu. " -For an IPP setup, select Internet Printing Protocol - IPP. -For a port 9100 setup, select HP Jet Direct - Socket. -For an LPD setup, select Line Printer Daemon - LPD.
6 Enter the IP address for the printer in the Address text box. " 7 8 18 For an LPD setup, type “lp” in the Queue text box. For an IPP setup, type “ipp” in the Queue text box. Check that KONICA MINOLTA mc7450 PPD is selected in the Printer Using list. Click Add.
9 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit and Duplex Unit according to your printer setup, and then click Continue. The new printer appears in the Printer List screen.
Selecting Print Options 1 Open Printer Setup Utility, which can be accessed by clicking Startup 2 3 20 Disk, then Applications, then Utilities. Select this printer in the Printer List, and then select Show Info from the Printers menu. Select Installable Options from the pop-up menu.
4 5 Select the appropriate settings in the Printer Memory, Hard Disk, Paper Source Unit and Duplex Unit pop-up menus according to your printer setup, and then click Apply Changes. Close the Printer Info dialog box.
Specifying Page Setup Settings The following dialog box appears when Page Setup... is selected from the File menu in the application being used. 1 2 Select Page Setup... from the File menu. The Page Setup dialog box appears. Select this printer in the Format for pop-up menu. You can select the following sections from the Settings pop-up menu. 22 Section Description Page Attributes This is used to specify the settings for the paper size, scaling, and print orientation.
Page Attributes Options The Page Attributes section is used to specify the settings for the paper size, scaling, and print orientation. Paper Size Select the desired paper size from the Paper Size pop-up menu. Orientation Select either a vertical or horizontal page orientation for printouts. Scale If you want to enlarge or reduce the size of the printout, enter the scale ratio here (1-400%) " Regardless of which paper size is selected, the printer does not print within 0.
Custom Paper Size Options The Custom Page Size section is used to specify the dimensions for a custom page size. + Click this button to create a new custom page size. Click this button to delete a custom page size. Duplicate Click this button to duplicate (copy) the settings of an existing custom page size and create a new custom page size based on those settings. Paper Size Enter the dimensions of the paper height and width for the custom page size. Height: 5.5 - 18.
Specifying Print Settings The following dialog box appears when Print... is selected from the File menu in the application being used. 1 2 Select Print... from the File menu. The Print dialog box appears. Select this printer in the Printer pop-up menu. The Print dialog box is used to specify the following print options.
Print Dialog Box 26 Section Description Copies & Pages This section contains options for the number of copies to be printed and the range of pages to print. Layout This section contains options for specifying the page layout when printing and the setting for double-sided printing. Scheduler This section contains options for specifying the print timing and priority of jobs. Paper Handling This section contains options for specifying the pages to be printed and their printing order.
Section Description Summary This is used to check the current settings. " No warning message will be displayed if options cannot be used together are selected. Common buttons ? (Help button) This displays help information about the Print dialog box. PDF Click this button to select PDF menu. The print output can be save as a PDF file, or to send a fax. Preview Click this button to view a preview image of the printout, to check that the print options are set correctly.
Copies & Pages The Copies & Pages section is used to specify the number of copies to print and the range of pages to print. Copies This specifies the number of copies to be printed. If the Collated checkbox is selected, all pages in the documents are printed as sets of printouts. For example, if 5 is entered for Copies and Collated is selected, the document is printed five times from the first page to the last page. Pages All: Prints all pages in the document.
Layout The Layout section is used to specify the page layout when printing and the setting for double-sided printing. Pages per Sheet Specifies the number of pages to be printed on one sheet of paper. For example, if 2 is selected, two pages are printed on one sheet of paper. Layout Direction If you are printing more than one page per sheet, this specifies the direction and order the pages should be arranged on each sheet of paper.
" To print on both sides of the paper, Duplex Unit must be selected under Installable Options (p. 20). The Long-Edge Biding check box or Short-Edge Biding check box can be selected even when the Duplex Unit is not installed. However, in this case, the print job will be cancelled. Scheduler The Scheduler section is used to specify the timing and priority for printing jobs. Print Document Now: Select this option to begin printing immediately. At: Specify the time to begin printing.
Paper Handling The Paper Handling section is used to specify the pages that are to be printed and the order in which the pages are printed. Page Order Automatic: Select this option to print in the original page order of the document. Normal: Select this option to print in the normal page order. Reverse: Select this option to print in the reverse page order. Print All pages: Select this option to print all pages.
ColorSync Color Conversion Allows you to select host-based color matching or printer-based color matching. Quartz Filter Allows you to select Quartz Filter. Cover Page Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type.
Billing Info Allows you to set billing information printed on cover page. Error Handling PostScript Errors Allows you to select whether or not a report is outputted when a PostScript error occurs. Tray Switching This feature is not available with this printer.
Paper Feed The Paper Feed section is used to specify the paper feed setting. All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray different from the tray used to print the rest of the document. Remaining from The rest of the document is printed from the specified paper tray when the first page is to be printed on paper from a different tray.
Color Options Quick Color Allows you to select a color preset. " When Custom is selected, Advanced Color Options button becomes effective. Brightness Allows you to set Brightness. Color as Grayscale Allows you to set Grayscale color. Color Separation Allows you to set Color Separation. Advanced Color Options Click this button to display the Advanced Color Options pane.
Advanced Color Options/Image RGB Source Allows you to select RGB color profiles for images. RGB Intent Allows you to select color intent for RGB images. RGB Gray Treatment Allows you to select RGB gray treatment for images. Destination Profile Allows you to select Destination Profile for images. Halftone Allows you to select halftone for images. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane.
" In order to start up Download Manager from the Advanced Color Options pane, Download Manager must be copied into the folder at the path Application\Download Manager mc7450. After creating the folder "Download Manager mc7450" in the "Application" folder, copy Download Manager into the created folder. Advanced Color Options/Text RGB Source Allows you to select RGB color profiles for text. RGB Intent Allows you to select color intent for RGB text.
Manage Profile Click this button to display the Color Profile Management dialog box. From this dialog box, color profiles can be added or deleted to those available as settings for RGB Source, Destination Profile and Simulation Profile of the Advanced Color Options pane. Download Manager Click this button to start up the installed Download Manager.
Destination Profile Allows you to select Destination Profile for graphics. Halftone Allows you to select halftone for graphics. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane. Manage Profile Click this button to display the Color Profile Management dialog box.
Advanced Color Options/Simulation Simulation Profiles Allows you to select color profiles for simulation. Match Paper Color Allows you to set Match Paper Color. CMYK Gray Treatment Allows you to select Simulation gray treatment. Hide Advanced Options Click this button to hide the Advanced Color Options pane and display the Color Options pane. Manage Profile Click this button to display the Color Profile Management dialog box.
Printer Features Nearest Size and Scale If no paper tray contains paper of the specified size, the page is automatically enlarged or reduced and paper of the most appropriate size is selected. Manually Print on 2nd Side This feature must be set when you set paper already printed on the front side. Paper Type Select the setting for the type of media loaded into the specified media tray.
Summary The Summary is used to check the currently selected print settings.
Troubleshooting Symptom Solution The setting in the saved presets are not applied. Depending on the functions selected for the printer, some preset settings are not saved. Media type error appears. (OS X 10.2 only) If a media type, such as “Transparency,” is specified for Tray 3, Tray 4 or Tray 5, a media type error appears and the printer stops. Be sure to specify a media type supported by Tray 3, Tray 4 and Tray 5. Checking the version num- For Mac OS X 10.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Operation on Mac OS 9 EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the following system requirements. Computer Apple Macintosh computer with a PowerPC G3 or later processor (PowerPC G4 or later is recommended) Connection between computer USB connection and printer Network connection (10Base T/100Base TX/1000Base T) Operating system Mac OS 9.1 or later Mac OS X Classic mode (9.2.2 or later) When using the Classic environment of Mac OS X, Mac OS X 10.2.
Installing the Printer Driver 1 Double-click the mc7450 OS9 Installer icon. The installer for the printer driver starts up. " 2 3 When using Mac OS X, start up the Classic environment before installing the printer driver. Check the details of the License Agreement, and click Accept if you agree to the terms of the license. Click Install. The installer installs the printer driver.
4 Installation starts. After the installation has been completed, click Quit. This completes the installation of the magicolor 7450 printer driver. Selecting the Printer in the Chooser Use the Chooser to use AppleTalk to connect the printer. 1 2 Use an 10Base-T/100Base-TX/1000Base-T cable to connect the printer to a Ethernet network. Select Chooser from the Apple menu. " When using Mac OS X, the Apple menu is available with the icon for the Classic environment in the menu bar.
3 Select the LaserWriter 8 icon from the icons on the left side of the Chooser. The printer name appears in the Select a printer section on the right side of the Chooser. 4 5 6 Select the printer. Click Create. Select KONICA MINOLTA mc7450PS en, then click Select. The printer setup dialog box appears.
" 7 For operating systems other than those in English, select the printer indicated below, according to the language of the operating system.
Selecting the Printer in the Desktop Printer Utility Use the Desktop Printer Utility to use a USB cable to connect the printer. 1 2 3 4 5 6 Use the USB cable to connect the printer and your computer. From Hard Disk, select Desktop Printer Utility. Select LaserWriter 8 from With pop-up menu. Select Printer (USB) from Create Desktop list. Click OK. Select Change to select the PPD file.
7 8 9 10 52 Select KONICA MINOLTA mc7450PS en from the list of PPD files. Click Select. Click Change to select the USB Printer. Select magicolor 7450 from the Select a USB Printer list.
11 12 13 14 Click OK. Click Create. Click Save. Specify a printer name in the Save desktop printer as text box, and then click Save. The icon for magicolor 7450 appears on the desktop. " In the Classic environment, no icon appears on the desktop.
Specifying Page Setup Settings The Page Setup dialog box appears when Page Setup... is selected from the File menu. Page Attributes Options The Page Attributes section is used to specify the options for the Paper Size, scaling, and page orientation. Paper Select the desired Paper Size from the Paper pop-up menu. Scale (%) If you want to enlarge or reduce the size of the printout, enter the scale ratio (25%-400%) here.
Specifying a Custom Paper Size You can also specify a paper size that is not listed in the Paper Size pop-up menu. 1 2 Select Custom Paper Sizes... from the pop-up menu, in the Page Setup dialog box. The Edit Paper Sizes dialog box appears. Click New. The following dialog box appears.
3 Enter a name for the custom paper size in the Custom Page Size Name field, enter the dimensions in the Width and Height fields, enter the margins in Margins fields, and then click OK. " 4 The default units used for the dimensions for Width, Height and Margins is inches. To specify the dimensions in millimeters, select cm or pts from the Units pop-up menu. To add several different custom paper sizes, click New and repeat step 3.
Specifying Print Settings The following dialog box appears when Print... is selected from the File menu in the application being used. You can specify the following options from the Print dialog box.
Print Dialog Box Options 58 Section Description General This section contains options for the number of copies to be printed, the paper source, and the range of pages to be printed. Background Printing This section contains options for spooling the print data for background or foreground printing and the document printing time. Color Matching This section contains options for Color Matching. Cover Page This section contains for specifying cover page settings.
" No warning message will be displayed if options that cannot be used together are selected. Common buttons Preview Click this button to view a preview image of the printout, to check that the print options are set correctly. Cancel Click this button to close the Print dialog box without applying any of the settings. OK Click this button to print using the selected print options. Save Settings Click this button to save configuration changes made in the print dialog.
General Options Copies Allows you to specify how many copies of the print job you want printed. Collated If this item is selected, your print job is collated (one complete copy of the document is printed before the next copy is printed). Left unselected, the printing is uncollated. Pages Select All to print all pages in the open document. To print a specific range of pages, select From, and then enter the beginning page number in the From text box and the ending page number in the To text box.
Background Printing Print In Allows you to choose between printing in foreground and printing in background. Printing in background creates a spool file that is temporarily saved on your computer until the print job is ready to be processed. This allows you to continue working in your applications while the print job is processing. If you don’t have enough free file space on your computer to process a spool file, select Foreground printing.
Color Matching Print Color Allows you to choose from the color configurations available on your computer. Intent Allows you to specify the color matching configuration or allow for automatic configuration. This item is disabled (grayed out) unless ColorSync Color Matching is the selected Print Color setting. Printer Profile Allows you to select from the printer profiles that are available.
Cover Page Print Cover Page Lets you choose whether to print a cover page, and specify Page the placement of the cover page in relation to the remaining pages of the print job. Cover Page Paper Source Allows you to select the paper tray containing the cover Paper Source page media. The Cover Page contains information about the print job such as: user name, application, document name, date, time, printer, and number of pages. This option is disabled (grayed out) if Print Cover Page is set to None.
Font Settings Font Documentation – Annotate Font Keys: Allows you to determine if the font keys are annotated. Font Downloading – Preferred Format: Allows you to select the preferred font format. – Always download needed fonts: If selected, fonts should always be downloaded to the printer. Printer fonts are not used. – Never generate Type 42 format: If selected, Type 42 fonts are not generated. – Use Defaults: Restores factory default settings for font downloading.
Job Logging If there is a PostScript error Allows you to select whether or not a report is outputted when a PostScript error occurs. Job Documentation Allows you to specify generating a job copy in the folder specified as the Job Documentation Folder, and generating a job font log following the completion of the print job. Job Documentation Folder Allows you to select the location of the Job Documentation Folder.
Layout Pages Per sheet Allows you to set the number of logical pages per physical sheet. Layout direction Lets you identify either left-right or right-left logical page direction on the physical sheet. Border Allows you to select a border to surround each logical page. Print on Both Sides Allows you to configure the print job for duplex printing. This setting is disabled (grayed out) unless an optional duplex unit is installed.
Save as File Format Select the file format of the output file. PostScript Level Allows you to select from available PostScript levels. Data Format Sends the print job data to the file in either ASCII or Binary format. Font Inclusion Allows you to choose the fonts that are included with the Inclusion print job as it is saved to a file.
Watermark Text Allows you to select watermark text. Font Allows you to select watermark font type. Size Allows you to select watermark font size. Color Allows you to select watermark font color. Transparent Allows you to set watermark transparency. Position Allows you to select watermark position.
Job Retention Job Retention Select type of job. – Print: The job is printed normally. – Secured Job: Printer dose not print the job without the panel operation. Printer prints the job when you input Security ID correctly. The job is deleted after all copies are printed. – Stored Job: Printer dose not print the job without the panel operation. You can print desired copies through the panel. You can print additional copies through the panel later.
Security ID Select a Security ID to a Job. " To use Job Retention feature, the optional Hard Disk must be installed on the printer. In addition, the printer must be set up with the Chooser to use the Hard Disk. For details on selecting the Hard Disk with the Chooser, refer to “Selecting the Printer in the Chooser” on page 48. Color Options Brightness Allows you to set Brightness of the image. Color as Grayscale Allows you to set Grayscale color.
Image Option, Text Option, Graphics Option RGB Source Allows you to select RGB color profiles for images, text and graphics. RGB Intent Allows you to select RGB intent for images, text and graphics. RGB Gray Treatment Allows you to select RGB gray treatment for images, text and graphics. Halftone Allows you to select halftone for images, text and graphics.
Simulation Option Simulation Profiles Allows you to select RGB color profiles for simulation. Match Paper Color Allows you to set Match Paper Color. CMYK Gray Treatment Allows you to select CMYK gray treatment.
Printer Features Nearest Size and Scale If no paper tray contains paper of the specified size, the page is automatically enlarged or reduced and paper of the most appropriate size is selected. Manually Print on 2nd Side This feature must be set when you set paper already printed on the front side. Paper Type Allows you to select Paper Type.
Checking Print Jobs To check the progress of print jobs, double-click the magicolor 7450 desktop printer icon. " 74 In the Classic environment, Print Monitor automatically starts up, and the icon appears in the Dock. Click the Print Monitor icon to check the status of print jobs.
Troubleshooting Symptom Action When printing on both sides of paper with a custom size, an error occurs. Both sides of paper with a custom size cannot be printed on. In addition, there are limitations on the media types that can be selected. Refer to the User’s Guide (CD-ROM) provided with the printer. When printing from a Web Depending on the Web browser being used, browser, each frame is each frame will be printed on a separate printed on a separate page. page.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Operation on Linux EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
System Requirements for the Printer Driver Before installing the printer driver, make sure that your system meets the following system requirements. Operating systems Red Hat Linux 9.0, SuSE Linux 8.
Installing PPD File From the Command Line " " 1 Before proceeding with the installation, be sure to exit all running applications. Root privileges are required in order to install ppd file. Copy the ppd file from the Software Utilities CD-ROM to the “/usr/share/ cups/model/KONICA MINOLTA/” on the computer. " " 2 3 4 A ppd file for each language is available in the corresponding “drivers/linux/ppd/” folder on the CD-ROM. Use the appropriate ppd file for the language.
Adding the Printer " 1 2 3 4 5 6 After copying the PPD file, be sure to restart CUPS. Start up the Web browser. Enter the URL “http://localhost:631”, and then click Manage Printers. The CUPS Administration Web page appears. Click Add Printer. A pop-up window appears. Enter the user name and password for using root privileges, and then click OK. Enter the printer name, location, and description, and then click Continue. Select a Device Port from the Device list, then click continue.
- USB: USB Printer #1 (KONICA MINOLTA magicolor 7450) 7 - Parallel: Parallel Port #1 For a USB or parallel connection, skip to step 8. Enter the device URI in the following form: socket://[:port] " 8 9 10 Example: Using Printer IP - socket:/ /192.168.1.190:9100 Using printer Hostname socket://Hostname:9100 Hostname may be substituted by IP Address, and Port is optional. Click Continue. Select KONICA MINOLTA, click Continue.
Specifying Printer Driver Settings Displaying the Settings Page 1 2 3 82 Start up the Web browser. Enter the URL “http://localhost:631”, and then click Manage Printers. Printer on localhost.localdomain window appears. Click Configure Printer. The printer driver settings page appears.
Printer Driver Settings Extra Parameters Settings Brightness Specifies the brightness of the image as -15%, -10%, -5%, 0%, +5%, +10%, or +15%. The default setting is 0%. Color Separation Specifies the color separation as Yes or No. The default setting is No. Manually Print on 2nd side Select Yes when you set paper already printed on the front side. The default setting is No.
Parameters Settings Paper Source Specifies the paper source as Tray 1, Tray 2, Tray 3, Tray 4, Tray 5, Tray 1 (Manual Feed), or Auto. The default setting is Tray 1. Paper Type Specifies the paper type as Printer Default, Plain Paper, Recycled, Transparency, Transparency 2, Glossy, Label, Thick 1 (91 - 150g/m2), Thick 2 (151 - 210g/m2), Thick 3 (211 - 256g/m2), Letterhead, Envelope, or Postcard. The default setting is Printer Default.
Image Options Parameters Settings Image Halftone Specifies the halftone for graphics as Line Art, Detail, or Smooth. The default setting is Detail. Image RGB Gray Treatment Specifies the RGB Gray Treatment as Composite Black, Black and Gray, or Black Only. The default setting is Composite Black. Image RGB Intent Specifies RGB intent for graphics as Vivid, Photographic, Relative Color, or Absolute Color. The default setting is Photographic.
Simulation Parameters Settings CMYK Gray Treatment Specifies simulation gray treatment as Composite Black, Black and Gray, or Black Only. The default setting is Composite Black. Match Paper Color Specifies the Match Paper Color. The default setting is No. Simulation Profile Specifies the simulation profile as None, SWOP, Euroscale, Commercial Press, DIC, or TOYO. The default setting is None.
Banners Parameters Settings Starting Banner Specifies the starting banner as none, classified, confidential, secret, standard, topsecret, or unclassified. The default setting is none. Ending Banner Specifies the ending banner as none, classified, confidential, secret, standard, topsecret, or unclassified. The default setting is none.
Printing a Document The contents and available options that appear in the print dialog box may vary depending on the application being used. Example Using LPR Command With applications other than OpenOffice, the following print dialog box appears. 1 2 3 4 88 Click Properties in the Print dialog box. The Print Properties dialog box appears. Enter the command “lpr -P” followed by the name of the printer, and then click OK. The Print dialog box appears again. Click Print to print the document.
Example Using OpenOffice " " 1 2 3 The procedure for printing on Red Hat 9 with OpenOffice 1.0.2 is described below. The following procedure or some steps may be different depending on the version of the operating system being used. First, use m7450PX.ppd to add the printer to the system. For details on adding a printer to the system, refer to “Adding the Printer” on page 80. From the main menu, select Office, then OpenOffice.org Printer Setup. The printer Administration dialog box appears.
4 Click Import. Driver Installation dialog box appears. 5 6 7 8 9 10 90 Enter “/usr/share/cups/model/KONICA MINOLTA/” in the driver directory. In the Selection of drivers list, select KONICA MINOLTA mc7450 OpenOffice PPD. Click OK. Select KONICA MINOLTA mc7450 OpenOffice PPD, and then click Next. In the command line, enter “lpr -P” followed by the name of the printer added first, then click Next. Change the printer name.
11 12 13 14 15 16 Click Finish. The Printer Administration dialog box appears again. Click Close. From the main menu, select Office, then OpenOffice.org Writer. Click Print in the File menu. The Print dialog box appears. Select the name of the printer specified in the OpenOffice printer settings. Click OK.
Checking Print Jobs You can check the status of print jobs from a Web browser. 1 2 3 Start up the Web browser. Enter the URL “http://localhost:631”. The CUPS Administration Web page appears. Click Manage Jobs. A list of the currently active print jobs appear. " 92 To check the status of completed print jobs, click Show Complete Jobs.
Troubleshooting Symptom Action The printer stops because of a paper size error or a paper type error. The job may have been sent with a prohibited combination of settings (for example, for the paper size and media type). Printing is not possible with postcards or overhead projector transparencies if Plain Paper is selected. Printing does not continue with a custom paper size. Printing with custom paper sizes is not possible directly from the printer driver.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Operation on NetWare EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Printing With NetWare The printer controller supports the following environments. Network Printing in a NetWare Environment NetWare Version Protocol Used Emulation Service Mode NetWare 4.x IPX Bindery/NDS Pserver/Nprinter NetWare 5.x/6 IPX NDS Pserver TCP/IP NDPS(lpr) For Remote Printer Mode With NetWare 4.x Bindery Emulation " Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
7 In Administrator mode of PageScope Web Connection, select Net Ware from the Network tab, and then specify the following settings. – Netware Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network environment.) – Mode: Select NPrinter/RPrinter. – Printer Name: Specify the printer name. (Default: MC7450-XXXXXX) – Printer Number: 8 9 Specify the printer number (0-255). When 255 is specified, the setting is Auto.
For Print Server Mode With NetWare 4.x Bindery Emulation " 1 2 3 4 5 6 Before using bindery emulation, check that bindery emulation is compatible with the NetWare server. From a client computer, log on with Supervisor permissions to access the NetWare server where the Pserver is registered. Start up Pconsole. From the Available Options list, select Quick Setup, and then click the [Enter] button.
– Frame Type: Select Auto. (Select the frame type according to the network environment.) – Mode: Select PServer. – Print Server Name: Specify the print server name created in step 4. – Print Server Password: Specify only when setting from the NetWare server. – Print Queue Scan Rate: Specify 1. (Change as necessary.) – Bindery/NDS: Select Bindery/NDS. – Preferred File Server: 7 8 9 Specify the name of the file server that connects to the Pserver.
5 In Administrator mode of PageScope Web Connection, select NetWare from the Network tab, and then specify the following settings. – Netware Print: Select Enable. – Frame Type: Select Auto. (Select the frame type according to the network environment.) – Mode: Select NPrinter/RPrinter. – Printer Name: Specify the printer name. (Default: MC7450-XXXXXX) – Printer Number: 6 7 8 100 Specify the printer number (0-255). When 255 is specified, the setting is Auto.
For NetWare 4.x/5.x/6 Print Server Mode (NDS) " 1 2 3 4 Log on to NetWare as an administrator from a client computer. Start up NWadmin. Select either the organization or organizational unit container that offers the print service, and then click Print Services Quick Setup (non-NDPS) on the Tools menu. Enter the appropriate names in the Printer Server Name, Printer Name, Print Queue Name, and Print Queue Volume fields, select Other/ Unknown from the Printer Type field, and then click the [Create] button.
– Frame Type: Select Auto. (Select the frame type according to the network environment.) – Mode: Select PServer. – Print Server Name: Specify the print server name created in step 4. – Print Server Password: Specify only when setting from the NetWare server. – Print Queue Scan Rate: Specify 1. (Change as necessary.) – Bindery/NDS: Select NDS. – Preferred NDS Context Name: Specify the name of the context that connects to Pserver.
7 8 9 10 11 In the Gateway Types, select Novell Printer Gateway, and then register it. In the Configure Novell PDS for Printer Agent window, select (None) for the printer type and Novell Port Handler for the port handler type, and then register the settings. In Connection type, select Remote (LPR on IP), and then register it. Enter the IP address set for this machine as the host address, enter Print as the printer name, and then click the [Finish] button to register the settings.
– For Windows NT4.0 5 104 Software Utilities CD-ROM: drivers\windows NT4\ps\"language" or drivers\windows NT4\pcl\"language" Follow the on-screen instructions to complete the installation.
Printer Management Utilities EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Installing Printer Management Utilities on Windows " " You must have administrator privileges in order to install the Printer Management Utilities. Before proceeding with the installation, be sure to exit all running applications. The following procedure describes how to install the Printer Management Utilities. Crown Print Monitor+ Status Monitor Download Manager Utility PageScope Network Setup " 1 2 3 4 5 6 7 8 9 106 To install the Peer to Peer Printing Tool, start Setup.
Understanding the Ethernet Configuration Menus EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Ethernet Menu Location within the Configuration Menu READY PROOF/ PRINT MENU PRINT MENU PAPER MENU QUALITY MENU CAMERA DIRECT INTERFACE MENU JOB TIMEOUT ETHERNET TCP/IP ENABLE IP ADDRESS SUBNET MASK DEFAULT GATEWAY DHCP/ BOOTP TELNET 108 ENABLE APPLETALK ENABLE SPEED/DUPLEX SYS DEFAULT MENU SERVICE MENU NETWARE CAMERA DIRECT Ethernet Menu EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Accessing the Ethernet Menu Use the following series of keystrokes at the printer to access the Ethernet menu options on your printer. This menu provides access to all of the configurable network items. Press this key . . . (until) the message window reads. . . PROOF/PRINT MENU or if no optional hard disk is installed: PRINT MENU INTERFACE MENU ETHERNET " After the Ethernet settings are changed, the printer automatically reboots.
Using the Network Menu Options If the printer is connected to a network, the following settings should be specified. For details about each setting, contact your network administrator. " When manually setting the IP address, Subnet Mask, and Gateway turn off DHCP first. TCP/IP Enable Purpose Enables or disables TCP/IP. If YES is selected, TCP/IP is enabled. If NO is selected, TCP/IP is disabled. Options YES NO Default YES IP Address Purpose Sets the IP address of this printer on the network.
Default Gateway Purpose Sets the address of the router/gateway if a router/gateway is used on your network and you allow users outside your network environment to print on your printer. Range 0–255 for each xxx triplet Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to move between triplets. Default 000.000.000.
NetWare Enable Purpose Enables or disables NetWare. If YES is selected, NetWare is enabled. If NO is selected, NetWare is disabled. Options YES NO Default YES AppleTalk Enable Purpose Enables or disables AppleTalk. If YES is selected, AppleTalk is enabled. If NO is selected, AppleTalk is disabled. Options YES NO Default YES Speed/Duplex 112 Purpose Specifies the transmission speed for the network and the transmission method for bi-directional transmission.
CAMERA DIRECT Enable Purpose Select whether to enable or disable camera direct printing. If ENABLE is selected, camera direct printing is enabled. If DISABLE is selected, camera direct printing is disabled.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Network Printing EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Network Connection Theory To connect your printer in a TCP/IP network environment, you must make sure that the internal network addresses in the printer have been set. " 116 In many cases, you have to enter only a unique IP address. However, you may also have to enter a subnet mask and/or a gateway (router) address, depending on your network configuration requirements.
Making the Connection Ethernet Interface An RJ45 connector can be used as the Ethernet interface for this printer. When connecting your printer to an Ethernet network, the tasks you perform depend on how you plan to set the printer’s IP (Internet Protocol) address. Printers are shipped with a preset IP address, subnet mask, and gateway. IP Address—A unique identifier for each device on a TCP/IP network. Subnet Mask—A filter used to determine what subnet an IP address belongs to.
3 When the printer’s message window displays READY, print a configuration page to verify that the IP address is set. " If the configuration page was printed immediately after the message READY appeared, the updated IP address information may not be applied. Press this key . . . (until) the message window displays . . . READY PRINT MENU CONFIGURATION PG PRINT 4 Install the printer driver and utilities.
Setting the Address Manually You may also manually change the printer’s IP address, subnet mask, and gateway by using the following instructions. (See chapter 6, “Understanding the Ethernet Configuration Menus,” for more information.) " When manually setting the IP address, turn off DHCP and BOOTP first. In addition, when the IP address is changed, add a new port or reinstall the printer driver. If the control panel is used to change the IP address, the DHCP setting is automatically set to OFF.
Press this key . . . (until) the message window reads . . . IP ADDRESS IP ADDRESS 000.000.000.000 Use the and keys to move to each of the four number triplets. Use the and keys to increase or decrease each number. IP ADDRESS xxx.xxx.xxx.xxx 3 If you don’t want to set the subnet mask or gateway, go to step 5. If you don’t want to set the subnet mask, but you do want to set the gateway, go to step 4. If you want to set the subnet mask, follow these steps. Press this key . . .
Press this key . . . (until) the message window displays . . . Use the and keys to move to each of the four number triplets. Use the and keys to increase or decrease each number. SUBNET MASK xxx.xxx.xxx.xxx 4 If you don’t want to set the gateway, go to step 5. If you want to set the gateway, follow these steps. Press this key . . . (until) the message window displays . . . DEFAULT GATEWAY DEFAULT GATEWAY 000.000.000.000 Use the and keys to move to each of the four number triplets.
5 Save your configuration changes and make the printer ready for printing again. Press this key . . . (until) the message window displays . . . Press the Cancel key 2 times to reboot the printer 6 After rebooting the printer, print a configuration page to verify that the correct IP address, subnet mask, and gateway have been set. Press this key . . . (until) the message window displays . . .
Network Printing Network printing terms are described below. AppleTalk Bonjour BOOTP DDNS DHCP HTTP IPP IPX/SPX LPD/LPR NetBEUI SLP SNMP Port9100 SMB SMTP This chapter contains descriptions on the network printing terms and the IPP printing methods. " In addition to these protocols, this printer supports EtherTalk. AppleTalk A generic name for the protocol suite developed by Apple Computer for computer networking.
the workstation. This enables the workstation to boot without requiring a hard or floppy disk drive. DHCP DHCP (Dynamic Host Configuration Protocol) is a protocol for assigning dynamic IP addresses to devices on a network. With dynamic addressing, a device can have a different IP address every time it connects to the network. In some systems, the device's IP address can even change while it is still connected. DHCP also supports a mix of static and dynamic IP addresses.
IPX/SPX IPX/SPX (Internetwork Packet Exchange/Sequenced Packet Exchange) is a networking protocol developed by Novell. It was used mainly in Netware environments as the general LAN protocol, where TCP/IP has become widespread. LPD/LPR LPD/LPR (Line Printer Daemon/Line Printer Request) is a platformindependent printing protocol that runs over TCP/IP. Originally implemented for BSD UNIX, its use has spread into the desktop world and is now an industry standard.
Multicasts, on the other hand, are forwarded by routers. Multicast traffic from a given group is forwarded by routers to all subnets that have at least one machine that is interested in receiving the multicast for that group. SNMP SNMP (Simple Network Management Protocol) is actually a set of protocols for managing complex networks. SNMP works by sending messages to different parts of a network.
Printing via IPP (Internet Printing Protocol) – Windows Server 2003/XP/2000 Adding an IPP Port using Add Printer Wizard For Windows Server 2003/XP: Click start, select Printers and Faxes, and then click Add a Printer. For Windows 2000: Click Start, point to Settings, click Printers, and then 1 click Add Printer. In the second dialog box select the Network Printer (for Windows Server 2003/XP: A network printer, or a printer attached to another computer) radio button and then choose Next.
Windows Server 2003/XP—“Windows cannot connect to the printer. Either the printer name was typed incorrectly, or the specified printer has lost its connection to the server. For more information, click Help.” 3 4 5 128 Windows 2000—“Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server. Click Help for more information.” Windows Server 2003/XP—Go to step 4.
Troubleshooting Symptom Action SMB printing cannot be performed well. Follow the procedure described below to re-install the printer on a local computer. 1. Delete the printer icon from the printer folder. 2. Delete the printer driver and SMB port from the system. 3. Use the Add Printer Wizard to install the printer as a local printer. At this time, create a new local port, and specify the SMB port name.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Using Crown Print Monitor+ EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Adding a Crown Port After Installing Crown Print Monitor+ After Crown Print Monitor+ is installed, a Crown port can be added by following the procedure described below. " The following procedure provides a description when Crown Print Monitor+ is already installed on the computer. For Windows XP, 2000 and NT 4.0: 1 Click Start, and then click Printers and Faxes. " 2 3 4 5 For Windows 2000 and Windows NT 4.0, click Start, point to Settings, and then click Printers.
7 In the Port Name text box, type the logical name of the port. " " " 8 A maximum of 128 characters can be entered for the port name. If nothing is entered in the IP Address text box, the text entered in the Port Name text box is added to the IP Address text box. Change the text as necessary. Click OK. " 9 10 The logical name of the port is the description identifier for the port. Each port name must be unique.
6 Click OK. The Add Crown Port+ dialog box appears. 7 In the IP Address text box, type the IP address for the printer. " 8 " " " 134 The logical name of the port is the description identifier for the port. Each port name must be unique. A maximum of 128 characters can be entered for the port name. If nothing is entered in the IP Address text box, the text entered in the Port Name text box is added to the IP Address text box. Change the text as necessary. Click OK.
Configure Crown Port+ In the Configure Crown Port+ dialog box, specify the advanced settings for the Crown port. Parameter Default Setting Description Status update interval 5 seconds Status request 10 seconds timeout Specify the interval that Crown Print Monitor+ updates the print manager with the status of the printer connected to this port.
Parameter Default Setting Description Send request timeout 60 minutes Specify the length of time to wait for the print job to be sent until Crown Print Monitor+ returns the command to the Microsoft Print Spooler. " If the job has been sent through a Windows 2000/NT4 server and the time specified with the timer is exceeded, the print job is automatically stopped and deleted from the system.
Using PageScope Web Connection EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
About PageScope Web Connection This chapter provides information on PageScope Web Connection, an HTTP (HyperText Transfer Protocol)-based web page that resides in your printer and that you can access using your Web browser. This page gives you instant access to printer status and the most frequently used printer configuration options. Anyone on your network can access the printer using their web browser software.
" You cannot access PageScope Web Connection using a local (USB or Parallel) connection. If your PC and printer are connected via a USB or a Parallel cable, use the Status Display.
Setting Up the Printer Web Page Setting up the printer web page to run on your network involves two basic steps: Determining the name or address of your printer Setting up the “no proxy” preferences in your browser software Determining the Printer Name The printer web page can be accessed in two ways: " The printer names can also be determined via WINS if the network supports it.
" Our examples represent the IP address of the printer with: xxx.xxx.xxx.xxx. Always enter your printer's IP address without leading zeros. For example, 192.168.001.002 should be entered as 192.168.1.2. Internet Explorer (version 6.0 for Windows) 1 2 3 4 5 6 7 8 Start Internet Explorer. From the Tools menu choose Internet Options. Select the Connections tab on the dialog box. Choose the LAN Settings button to display the Local Area Network (LAN) Settings dialog box.
Netscape Navigator (version 7.1) 1 2 3 4 5 6 7 Start Netscape Navigator. From the Edit menu choose Preferences. Select the Advanced/Proxies directory from the left pane of the dialog box. Select the Manual Proxy Configuration radio button. In the No Proxy for: text box, type a comma after the last entry, and then type the printer name or the IP address of your printer. Choose OK to return to the main browser window.
Understanding the PageScope Web Connection Window The illustration below identifies the navigation and configuration areas of the windows that you see in PageScope Web Connection windows.
Current Status The current status of the printer is displayed at the top of all PageScope Web Connection windows. The icon displays the type of status being displayed. Icon Status Description Examples Ready The printer is online READY and either ready to WARMING UP print or printing. PRINTING Warning The printer needs attention, but printing continues. Error The printer needs TONER EMPTY attention before REPLACE C printing can resume.
" 3 Default password is set to “administrator”; however, once you have logged on in Administrator Mode, the password can be specified in the System - Password window. Choose the Login button. If you type an incorrect password, the following message displays: “Invalid Password Please check your input and try again !” Retype the password.
Viewing Printer Status System Page The System page is the starting point for all access to the printer’s internal web pages. On this page you find printer status and current configuration settings, printer identification, and links to all other web pages. Printer status " 146 Printer name All of the information displayed on the System page is read only.
Summary (previous page) The System/Summary window provides the following information. Item Description Printer name/status Shows the name assigned to your printer, and displays the current status of the printer—just as it’s displayed on the printer’s control panel message window. " The status display allows you to remotely identify possible printer problems, such as out of paper and out of toner. Device Status (Product Identifies the type of printer that you are browsing.
Device Information The System - Device Information window provides the following information. 148 Item Description System Version Identifies the controller firmware version. Control Panel Language Identifies the display language for the printer control panel. Country Identifies the country specifications of the printer. Administrator Name Identifies the name of the administrator of the printer.
Detail Paper Source The System - Detail - Paper Source window provides the following information. Item Description Paper Source Identifies the paper feed units Tray 1/2/3/4/5 installed on the printer. Paper Size Indicates the size of paper loaded in a specific tray. Paper Type Indicates the type of paper loaded in a specific tray. Paper Indicates the paper status (“Ready” or “Empty”) for each tray. Detail button Displays detailed information about the paper trays.
Paper Source (Detail) The System - Detail - Paper Source - Detail window provides the following information. Item 150 Description Paper Source Displays the names of the paper trays. Paper Size Displays the paper sizes. Paper Type Displays the paper types. Capacity Displays the maximum capacity for each paper tray. Paper Displays the amount of paper remaining. Back button Returns to the previous screen.
Output Tray The System - Detail - Output Tray window provides the following information. Item Description Tray Displays the names of the output trays. Paper Displays the status (Ready, Full) of the output trays.
Hard Disk The System - Detail - Hard Disk window provides the following information. Item Hard Disk Description Total Displays the total amount of space on the hard disk. If no hard disk drive is installed, “-” is displayed. Used Displays the amount of space on the hard disk that is used. If no hard disk drive is installed, “-” is displayed. Remaining Displays the amount of space remaining on the hard disk. If no hard disk drive is installed, “-” is displayed.
Interface Information The System - Detail - Interface Information window provides the following information. Item Protocol Information Description TCP/IP If Enable is displayed, TCP/IP is enabled. If Disable is selected, TCP/IP is disabled. IPP If Enable is displayed, IPP is enabled. If Disable is selected, IPP is disabled. NetWare If Enable is displayed, NetWare is enabled. If Disable is selected, NetWare is disabled.
Item Description AppleTalk If Enable is displayed, AppleTalk is enabled. If Disable is displayed, AppleTalk is disabled. SMTP If Enable is displayed, SMTP is enabled. If Disable is displayed, SMTP is disabled. SNMP If Enable is displayed, SNMP is enabled. If Disabled is displayed, SNMP is disabled. FTP If Enable is displayed, FTP is enabled. If Disable is displayed, FTP is disabled. SMB If Enable is displayed, SMB is enabled. If Disable is displayed, SMB is disabled.
Consumables Consumables Status Type The System - Details - Consumables window provides the following information: Item Description Consumables Identifies the type of consumable that is being monitored.
Counter The System - Counter window provides the following information: 156 Item Description Pages Printed Indicates the number of monochrome/color pages printed and the number of normal/double-sided pages printed, respectively. Sheets Printed by Paper Size Indicates the number of pages printed by paper size. Sheets Printed by Paper Type Indicates the number of pages printed by paper type.
Online Assistance The System - Online Assistance window provides the following information: Item Description Contact Displays the organization that provides assistance with the printer. Contact Information Displays the web address for assistance. Product Help URL Displays the web address for assistance. Corporate URL Displays the KONICA MINOLTA web address. Supplies and Accessories Displays the web address where you can order printer supplies and accessories.
Job Page This page allows you to view the status of current print jobs. Active Job List (shown above) The Job - Active Job List window provides the following information for up to 49 print jobs: 158 Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number. User Name If known, displays the owner of the print job. File Name Displays the name of the print file.
Done Job List The Job - Done Job List window provides the following information for up to 49 print jobs: Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a Number unique identification number. User Name If known, displays the owner of the print job. File Name Displays the name of the print file. End Time Displays the time that printing finished. Result Displays the result of the print job (OK, Error, or Cancelled).
Done Job List (Detail) The Job - Done Job List - Detail window provides the following information for the selected job: 160 Item Description Job Number Displays the print job identification number. Each print job that the printer receives is assigned a Number unique identification number. User Name If known, displays the owner of the print job. File Name Displays the name of the print file. Delivery Type Displays the delivery method for the job.
Print Page This page allows you to check the settings for printing when there is no PDL printer driver. Default Settings General Settings (shown above) The Print - Default Settings - General Settings window provides the following information. Item Description PDL Indicates default language to be selected. Paper Source The paper tray that is normally used is indicated. Duplex If Long-Edge Binding is indicated, the pages will be printed on both sides of the paper for long-edge binding.
Item Description Copies Indicates the default setting for number of copies to be printed. Paper Size Indicates the default setting for the size of paper. X Dimension Indicates the paper width when Paper Size is set to CUSTOM. Y Dimension Indicates the paper length when Paper Size is set to CUSTOM. Paper Type Indicates the default setting for the type of paper. Collate If On is indicated, all pages in a copy of the document can be printed before printing the next copy.
Paper Source Settings The Print - Default Settings - Paper Source Settings window provides the following information. Item Description Tray1/2/3/4/5 Paper Size (Tray 3,4,5 appears only if the optional lower feeder unit Paper Type is installed) Indicates the setting for the size of paper loaded into each paper tray. The Width and Length settings appear if Paper Size is set to CUSTOM (Tray 1 and 2 only). Size Setting (only Tray 2) Indicates the setting for the type of paper loaded into each Tray.
Item Description Tray Chaining If Enable is indicated and the specified paper tray runs out of paper during printing, a paper tray loaded with paper of the same size is automatically selected so printing can continue. If Disable is indicated and the specified paper tray runs out of paper, printing stops. Tray Mapping Tray Mapping Mode If On is indicated, Tray Mapping Mode is enabled. Paper is fed from the physical tray assigned to each logical tray. If Off is indicated, Tray Mapping Mode is disabled.
The Print - Default Settings - PCL Settings window provides the following information. Item Description Font Number Displays the default font in the PCL language. Symbol Set Displays the symbol set used with the PCL language. Lines Per Page Indicates how many lines are in a page in PCL language. Font Point Size Displays the font size in the PCL language. Font Pitch Size Displays the font pitch in the PCL language. CR/LF Mapping Indicates CR/LF code definition in PCL language.
Print Quality Settings The Print - Default Settings - Print Quality Settings window provides the following information. Print Quality Settings Item Description Color Mode If Color is indicated, the pages are printed in full color. If Grayscale is indicated, the pages are printed in black and white. Color Separation If On is indicated, color separation is performed. If Off is indicated, color separation is not performed. Brightness 166 Indicates the brightness of the printed image.
PCL Setting Item Description Contrast Indicates the contrast of the image. Image/Text Printing Source Identifies the color space for RGB data. Intent Indicates the color intent to be used on conversion RGB to CMYK by printer. Gray Treatment Indicates the method to reproduce RGB black and gray. Halftone Indicates how halftones are reproduced. If Line Art is indicated, halftones are reproduced with high precision. If Detail is indicated, halftones are reproduced with detail.
Item Description Simulation Profile Indicates the specific ICC simulation profile to be used for printed output. Intent Indicates the simulation intent to be used for simulation printing. CMYK Gray Treatment Indicates the method to reproduce CMYK black and gray for simulation printing. Calibration Settings Item Description Tone Calibration If On is indicated, image adjustments are applied. If Off is indicated, image adjustments are not applied.
The Print - Default Settings - Camera Direct Settings window provides the following information. Item Description Camera Direct Print If Enable is indicated, camera direct printing is enabled. If Disable is indicated, camera direct printing is disabled. Paper Source Indicates the paper tray used for camera direct printing. Layout Indicates how many successive pages are printed in a sheet with camera direct printing. Paper Margin Indicates the size of the paper margin with camera direct printing.
Download Font/Form PCL Font The Print - Download Font/Form - PCL Font page allows you to check the list of PCL fonts that the printer manages. 170 Item Description Number Displays the control number of the font. Font Name Displays the name of the fonts. Source Displays the location of the fonts.
PS Font The Print - Download Font/Form - PS Font page allows you to check the list of PostScript fonts that the printer manages. Item Description Number Displays the control number of the font. Font Name Displays the name of the fonts. Source Displays the location of the fonts.
Form Overlay The Print - Download Font/Form - Form Overlay page allows you to check the list of form overlays that the printer manages. 172 Item Description Number Displays the control number of the overlay. File Name Displays the name of the overlays. Source Displays the location of the fonts.
Color Profile The Print - Download Font/Form - Color Profile page allows you to check the list of color profiles that the printer manages. Item Description Number Displays the control number of the color profile. File Name Displays the file name of the color profile. Profile Name Displays the name of the color profile. Class Displays the type of color profile. Color Space Displays the color space for the color profile. Source Displays the location of the fonts.
Report Types The Print - Report Types window provides the following information. Item Description Configuration Page Prints the printer configuration page. Demo Page Prints the printer demo page. Statistics Page Prints the statistics page such as the number of pages printed. PCL Font Page Prints the PCL font lists. PS Font Page Prints the PostScript font lists. Menu Map Page Prints the menu map. Directory Listing Page Prints the directory list.
Direct Print The Print - Direct Print page allows you to print a file directly from the printer without starting up the application. " The printer must have the optional hard disk or the or the CompactFlash to use the Direct Print parameters described below. The following file formats can be printed using direct printing: PDF, TIF and JPEG. Item Description File Name Specify the location of the file to be printed. Click Browse, and then select the file.
Configuring the Printer In order to make any configuration changes through PageScope Web Connection, you must first enter Administrator Mode. See “Administrator Mode” on page 144 for instructions on logging into Administrator Mode. System Page This page allows you to configure several user- and printer-specific items.
Item Description Day Specifies the day for the printer’s internal clock. Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - DATE Hour Specifies the hour for the printer’s internal clock. Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - TIME Minute Specifies the minute for the printer’s internal clock. Configuration Menu Equivalent: SYS DEFAULT MENU - CLOCK - TIME Time Zone Specifies the time zone for sending e-mail notifications.
Admin Password The System - Admin Password window allows you to configure the following items: Item Description Current Password Type in the current password. Range: Up to 16 characters Default: [Blank] New Password Sets a new password to enter Administrator Mode. Range: Up to 16 characters Default: [Blank] " Passwords can be set to any string of numbers and letters (uppercase and lowercase) up to 16 characters in length.
Item Description Retype New Password Verifies the new password typed in the New Password text box. Range: Up to 16 characters Default: [Blank] " If the password typed in three text boxes doesn’t match, the following message displays when you choose the Apply button: “Please retype the correct password.” Click OK button, and then retype the passwords in both text boxes. Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values.
Device Information The System - Device Information window allows you to configure the following items: Item Description Administrator Name Specifies the name of the administrator for the printer. Range: Up to 255 characters Default: [Blank] Device Name Specifies the name of the printer. Range: Up to 255 characters Default: [Blank] Device Place Specifies the setup location for the printer.
Item Description Do Startup Page Selects whether or not a startup page is printed when the printer is turned on. Choices: On, Off Default: Off Configuration Menu Equivalent: SYS DEFAULT MENU - STARTUP OPTIONS-DO STARTUP PAGE Auto Continue Selects whether or not printing continues if the size or type of paper in the selected paper tray is different from the size or type of paper for the print job.
Item Description Energy Saver Time Specifies the length of time until the machine enters Energy Saver mode. Choices: 15 minutes, 30 minutes, 1 Hours, 3 Hours Default: 30 minutes Configuration Menu Equivalent: SYS DEFAULT MENU ENERGY SAVER TIME Menu Timeout Specifies the length of time until the status screen is displayed when no operation is performed while a menu or help screen is displayed in the message window. If Off is selected, no timeout occurs.
ROM Version The System - ROM Version window provides the following information. Item Description Engine ROM Version Displays the ROM version of the printer engine. Controller ROM Version Displays the ROM version of the printer controller. Boot ROM Version Displays the ROM version of the Boot ROM.
Online Assistance The System - Online Assistance window allows you to configure the following items: Item Description Contact Name Sets the name of the person or organization responsible for providing assistance with the printer. Range: Up to 63 characters Default: KONICA MINOLTA Customer Support Contact Information Sets the telephone number for printer assistance. Product Help URL Sets the help web site address for printer assistance. Range: Up to 127 characters Default: http://printer.
Item Description Supplies and Accesso- Sets the web address where you can purchase ries printer supplies and accessories. Range: Up to 127 characters Default: http://www.q-shop.com Contact Phone Number Specifies the telephone number of the printer administrator. Range: Up to 31 characters Default: [Blank] Contact Address Specifies the address of the printer administrator. Range: Up to 320 characters Default: [Blank] Contact Utility Link Specifies the link to the Printer Management Utilities.
Maintenance Clear Settings The System - Maintenance - Clear Settings page allows you to reset the printer settings to its factory defaults. Item Description Printer Settings Resets the printer settings to their defaults. Configuration Menu Equivalent: SYS DEFAULT MENU - RESTORE DEFAULTS - RESTORE PRINTER Network Settings Resets the network settings to their defaults.
Item Description Clear button When clicked, the message “Is it OK to restore Factory Defaults?” appears. Click OK to automatically restart the printer and return the settings to their default values. Logout button Logs out of Administrator Mode and returns to User Mode. Reset Printer The System - Maintenance - Reset Printer page allows you to reset the printer controller. Item Description Reset button When clicked, the message “Is it OK to reset the Printer?” appears.
Alert Mail The System - Alert Mail window allows you to configure the following items: Item Alert Mail Description Email Notice Specifies whether or not a notification is sent by e-mail when a warning occurs in the printer. Choices: Enable, Disable Default: Enable Email Address Specifies the e-mail address where the Notice notification is sent.
Item Alert Description Paper Empty Specifies whether or not a notification is sent when the paper tray runs out of paper. Choices: Enable, Disable Default: Enable Paper Jam Specifies whether or not a notification is sent when a paper misfeed occurs. Choices: Enable, Disable Default: Enable Maintenance Specifies whether or not a notification is sent when the time for a periodic maintenance has been reached.
190 Item Description Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode.
Print Page The Print page allows more detailed printer settings to be specified. Local Interface The Print - Local Interface window allows you to configure the following items: Item Description I/O Timeout Specifies the reception timeout (in seconds). Range: 5-300 Default: 15 Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode.
Default Settings General Settings The Print - Local Interface window allows you to configure the following items: Item Description PDL Selects default language to be selected. Choices: Auto, PCL, PS Default: Auto Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - DEF.
Item Description Paper Source The paper tray that is normally used can be specified. Choices: Tray1, Tray2, Tray3, Tray4, Tray5 Default: Tray2 Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE DEFAULT TRAY Duplex If Long-Edge Binding is selected, the pages will be printed on both sides of the paper for long-edge binding. If Short-Edge Binding is selected, the pages will be printed on both sides of the paper for short-edge binding.
Item Description Paper Type Specifies the default setting for the type of paper. Choices: Plain Paper, Recycled, Thick 1, Thick 2, Thick 3, Label, Transparency, Transparency 2, Envelope, Postcard, Letterhead, Glossy Default: Plain Paper Collate If On is selected, all pages in a copy of the document can be printed before printing the next copy. If Off is selected, all copies of the document are not printed separately.
Paper Source Settings Configuring the Printer EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500 195
The Print - Paper Source Settings window allows you to configure the following items: Item Description Tray1/2/3/4/5 Paper Size " Specifies the setting for the size of paper loaded into the tray. Default: Letter (U.S. model), A4 (other model) Configuration Menu Equivalent: Tray 3, 4 and 5 appear only if the optional lower feeder unit is installed. PAPER MENU - PAPER SOURCE - TRAY x PAPER SIZE " The paper size can be selected for Tray 1.
Item Description Length (only Tray 1/2) Specifies the paper length when Paper Size is set to Custom. Tray 1 Range: 5.50 - 47.24 (inch) / 140 - 1200 (mm) Tray 2 Range: 5.50 - 18.00 (inch) / 140 - 457 (mm) Configuration Menu Equivalent: PAPER MENU - PAPER SOURCE - TRAY x CUSTOM SIZE " Appears for Tray 2 only if Size Setting is set to User Select. Paper Type Specifies the setting for the type of paper loaded into the tray.
Item Description Tray Chaining Tray Chaining If Enable is selected and the specified paper tray runs out of paper during printing, a paper tray loaded with paper of the same size is automatically selected so printing can continue. If Disable is selected and the specified paper tray runs out of paper, printing stops.
PCL Settings The Print - PCL Settings window allows you to configure the following items: Item Description Font Number Sets the default font in the PCL language. Range: 0 - 102 Default: 0 Symbol Set Selects the symbol set used with the PCL language. Lines Per Page Selects how many lines are in a page in PCL language.
Item Description Font Point Size Sets the font size in the PCL language. Range: 4.00 - 999.75 Default: 12.00 Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - POINT SIZE Font Pitch Size Sets the font pitch in the PCL language. Range: 0.44 - 99.99 Default: 10.00 Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - PCL - FONT SOURCE - PITCH SIZE CR/LF Mapping Selects CR/LF code definition in PCL language.
PS Settings The Print - PS Settings window allows you to configure the following items: Item Description Wait Timeout Sets Postscript timeout. “0” means that no time-out control is effective. Range: 0 - 300 (in seconds) Default: 0 Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - POSTSCRIPT - WAIT TIMEOUT PS Protocol Specifies the PS protocol.
Item Description Print to PS Error Displays whether or not error printing is performed. Choices: On, Off Default: Off Configuration Menu Equivalent: SYS DEFAULT MENU - EMULATION - POSTSCRIPT - PS ERROR PAGE Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode.
Print Quality Settings Item Description Color Mode If Color is selected, the pages are printed in full color. If Monochrome is selected, the pages are printed in black and white. Choices: Color, Monochrome Default: Color Configuration Menu Equivalent: QUALITY MENU COLOR MODE Color Separation If On is selected, color separation is performed. If Off is selected, color separation is not performed.
Item Image/Text Printing Description Source Specifies the color space for RGB data. Choices: Device Color, sRGB Default: sRGB Configuration Menu Equivalent: QUALITY MENU - PCL SETTING Intent Specifies the color intent to be used on conversion RGB to CMYK by printer. Choices: Vivid, Photographic Default: Photographic (Image) Vivid (Text) Configuration Menu Equivalent: QUALITY MENU PCL SETTING Gray Treatment Specifies the method to reproduce RGB black and gray.
Item Description Graphics Printing Specifies the color settings for graphics. Choices: Same as Image Settings, Same as Text Settings Default: Same as Image Settings Configuration Menu Equivalent: QUALITY MENU PCL SETTING PS Setting Item Image/Text/ Graphics Printing Description RGB Source Specifies the color space for RGB data.
Item Description Destination Profile Specifies the ICC destination profile to be used for printed output. Default: Auto Configuration Menu Equivalent: QUALITY MENU PS SETTING Halftone Specifies how halftones are reproduced. If Line Art is selected, halftones are reproduced with high precision. If Detail is selected, halftones are reproduced with detail. If Smooth is selected, halftones are reproduced with smoothness.
Item Simulation Description Profile Specifies the specific ICC simulation profile to be used for printed output. Choices: None, SWOP, Euroscale, CommercialPress, TOYO, DIC Default: None Configuration Menu Equivalent: QUALITY MENU PS PROFILE SIMULATION Intent Specifies the simulation intent to be used for simulation printing.
Item Description Cyan/Magenta/ Yellow/Black Density Highlight Specifies the density of the highlight color. Choices: +3,+2,+1,0,-1,-2,-3 Default: 0 Configuration Menu Equivalent: QUALITY MENU CALIBRATION CMYK DENSITY Middle Specifies the density of the middle color. Choices: +3,+2,+1,0,-1,-2,-3 Default: 0 Configuration Menu Equivalent: QUALITY MENU CALIBRATION CMYK DENSITY Shadow Specifies the density of the shadow color.
Camera Direct Settings The Print - Default Settings - Camera Direct Settings window allow you to configure the following items: Item Description Camera Direct Print If Enable is selected, camera direct printing is enabled. If Disable is selected, camera direct printing is disabled.
Item Description Paper Source Specifies the paper tray used at Camera Direct printing. Choices: Tray1, Tray2, Tray3, Tray4, Tray5 Default: Tray2 Configuration Menu Equivalent: CAMERA DIRECT PAPER SOURCE " Tray 3, Tray 4, and Tray 5 appear only if the optional lower Feeder unit is installed. Layout Specifies how many successive pages in a sheet when Camera Direct printing.
Item Description Contrast Specifies the contrast of the Camera Direct printing. Choices: +15%, +10%, +5%, 0, -5%, -10%, -15% Default: 0 Configuration Menu Equivalent: CAMERA DIRECT - IMAGE QUALITY - CONTRAST RGB Source Specifies the color space for RGB data when Camera Direct printing.
Item Description Halftone Specifies how halftones are reproduced when Camera Direct printing. If Line Art is selected, halftones are reproduced with high precision. If Detail is selected, halftones are reproduced with detail. If Smooth is selected, halftones are reproduced with smoothness.
Download Font/Form PS Font " The printer must have the optional hard disk and/or memory card to use the PS Font parameters described below. The Print - Download Font/Form - PS Font window allow you to configure the following items: Item Download PS Font Description Radio button Specifies the download destination (HDD/ Memory Card) of the font. Text box Specifies the file name for the PostScript font to be downloaded. Browse button Displays a dialog box for browsing to the PostScript font file.
Item Description Logout button Logs out of Administrator Mode and returns to User Mode. Form Overlay " The printer must have the optional hard disk and/or memory card to use the Form Overlay parameters described below. The Print - Download Font/Form - Form Overlay window allow you to configure the following items: Item Description Download Form Radio button Overlay Specifies the download destination (HDD/ Memory Card) of the form overlay file.
Item Description Delete Form Overlay Check box Select the check box of the form overlay to be deleted, and then click Delete to delete the selected overlay file from the printer. Number Displays the control number of the form overlay. File Name Displays the name of the form overlay file. Source Displays the storage source of the form overlay. Delete button Deletes the form overlay(s) whose check boxes the left end are checked.
The Print - Download Font/Form - Color Profile window allow you to configure the following items: Item Description Download Color Radio button Profile Specifies the download destination (HDD/ Memory Card) of the color profile. Text box Specifies the file name for the color profile to be downloaded. Browse button Displays a dialog box for browsing to the color profile. Delete Color Profile Sends the specified color profile to the printer.
Network Page The Network page allows you to configure network settings. For more information on these protocols, see chapter 7, “Network Printing.” TCP/IP TCP/IP (shown above) The Network - TCP/IP - TCP/IP window allows you to configure the following items. For more information on these TCP/IP, see chapter 7, “Network Printing.” Item Description TCP/IP Sets whether or not to use TCP/IP.
Item Description Speed Specifies the operating mode and speed for Ethernet. Choices: Auto, 10Base-T(Half), 10Base-T(Full), 100Base-TX(Half), 100Base-TX(Full), 1000Base-T(Full) Default: Auto Configuration Menu Equivalent: INTERFACE MENU - ETHERNET SPEED/DUPLEX Auto IP Specifies the automatic assigning method for the printer IP address. Choices: DHCP/BOOTP Default: Checked Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - DHCP/BOOTP IP Address* Sets the printer’s IP address.
Item Description Default Gateway* If a router is used on the network, sets the router’s address. Range: 0–255 for each xxx triplet Default: 0.0.0.0 " If the specified router address is outside of the allowable range, the value is not changed, even after the Apply button is clicked. The setting returns to the previous value. Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/ IP - DEFAULT GATEWAY RAW Port Number Identifies the number of the printer’s RAW port.
IP Address Filtering The Network - TCP/IP - IP Address Filtering page allows you to specify the IP address and limitations for accessing the printer. " " 220 The settings described below are not applied to the DNS server and DHCP server. If the range of permitted IP addresses in Access Permission Address overlaps the range of refused IP address in Access Refuse Address, the refuse setting of Access Refuse Address is given priority.
Item Description Access Permission Address If Enable is selected, the range of IP addresses permitted access to the printer can be specified. A maximum of five ranges of permitted IP addresses can be specified. In addition, access from an IP address out of the specified range is prohibited. If Disable is selected, the permitted access setting is disabled. Choices: Enable, Disable Default: Disable Range of IP address permitted access Specify the range of IP addresses permitted access to the printer.
Item Description Range of IP Specify the range of IP addresses refused access to the address refused printer. Type the IP address at the beginning of the range access into the box on the left, and the IP address at the end of the range into the box on the right. Range: 0-255 for each xxx triplet Default: 0.0.0.0 " To specify a single IP address, type the same IP address into both the box for the starting IP address and for the ending IP address, or type “0.0.0.
Bonjour The Network - Bonjour page allows you to configure the following items. Item Description Bonjour Select whether to enable or disable the Bonjour function. Choices: Enable, Disable Default: Enable Bonjour Name Specify the Bonjour name for the printer. Range: Up to 63 characters Default: KONICA MINOLTA magicolor 7450(xx:xx:xx) " “xx:xx:xx” refers to the last six digits of the MAC address (in hexadecimal). Apply button Applies the configuration settings in this page.
NetWare NetWare 224 Configuring the Printer EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
The Network - NetWare - NetWare window allows you to configure the following items: Item NetWare Description NetWare Print Enables or Disables the NetWare print option. Choices: Enable, Disable Default: Enable Configuration Menu Equivalent: INTERFACE MENU ETHERNET - NETWARE ENABLE Frame Type Specifies the Frame Type. Choices: Auto, Ethernet802.2, Ethernet 802.3, Ethernet II, Ethernet SNAP Default: Auto Mode Specifies the NetWare Configuration mode.
Item Description Bindery/NDS Specifies the bindery options. Choices: NDS, Bindery/NDS, Bindery Default: NDS Preferred File Server Sets the Preferred File Server for the printer. Range: Up to 47 characters Default: [Blank] Preferred NDS Sets the Preferred NDS Context for the Context Name printer. Range: Up to 191 characters Default: [Blank] Preferred NDS Sets the Preferred NDS Tree for the Tree Name printer.
NetWare Status The Network - NetWare - NetWare Status window allows you to configure the following items: Item Description File Server Identifies current NetWare File Server. Queue Name Identifies current NetWare queue name. Queue Status Identifies current NetWare status. Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode.
IPP The Network - IPP window allows you to configure the following items. For details on IPP, refer to chapter 7, “Network Printing.” In order to apply the settings, the printer must be turned off, then on again after the setting is specified. Item Description IPP Print Sets whether or not to use IPP. Choices: Enable, Disable Default: Enable Accept IPP Job Sets whether or not to accept IPP Job.
Item Description Printer Name Sets the printer’s name. Range: Up to 127 characters Default: [Blank] Printer Location Sets the printer’s location. Range: Up to 127 characters Default: [Blank] Printer Information Specifies the printer information. Range: Up to 127 characters Default: [Blank] Printer URI Specifies the printer’s Uniform Resource Identifier (URI), authentication, and security.
Item Description Operational Support Print Job If this check box is selected, Print Job is enabled. Default: Checked Validate Job If this check box is selected, Validate Job is enabled. Default: Checked Cancel Job If this check box is selected, Cancel Job is enabled. Default: Checked Get Job Attributes If this check box is selected, Get Job Attribute is enabled. Default: Checked Get Jobs If this check box is selected, Cancel Job is enabled.
FTP Server The Network - FTP - Server window allows you to configure the following items: Item Description FTP Server Enables or Disables the FTP server. Choices: Enable, Disable Default: Enable Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode.
SNMP The Network - SNMP window allows you to configure the following items: Item Description SNMP If Enable is selected, SNMP is enabled. Choices: Enable, Disable Default: Enable 232 Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode.
SMB Print The Network - SMB - Print window allows you to configure the following items: Item Description SMB Print If Enable is selected, SMB Print is enabled. Choices: Enable, Disable Default: Enable NetBIOS Name Sets NetBIOS Name for the printer. Range: Up to 15 characters Default: MC7450-xxxxxx " xxxxxx displays six last digits of the MAC address in hexadecimals. Print Service Name Sets Print Server Name.
Item Description Work Group Sets Work Group name. Range: Up to 15 characters Default: WORKGROUP Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode. AppleTalk The Network - AppleTalk window allows you to configure the following items: Item Description AppleTalk If Enable is selected, AppleTalk is enabled.
Item Description Printer Name Sets the printer name. Range: Up to 31 characters Default: MC7450-xxxxxx " xxxxxx displays six last digits of the MAC address in hexadecimals. Zone Name Sets the Zone Name. Range: Up to 31 characters Default: * Current Zone Name Identifies the current zone name. Apply button Applies the configuration settings for this window. Clear button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode.
The Network - Email - Send Email window allows you to configure the following items: Item Description Send If Enable is selected, sending Email is enabled. Choices: Enable, Disable Default: Enable SMTP Server Address Specifies the address of the mail transmission server. Range: Up to 255 characters Default: 0.0.0.0 Port Number Specifies the port number of the mail transmission server.
SSL/TLS Information The Network - SSL/TLS Information page allows you to specify SSL/TLS settings. " As a default, SSL/TLS is not installed. Click Setting to create a certificate and specify the SSL settings. Item Description Setting button Displays the SSL/TSL Setting page. Logout button Logs out of Administrator Mode and returns to User Mode.
SSL/TLS Setting The Network - SSL/TLS Setting page allows you to select the following SSL/ TLS settings that appear. Item Description Create a self-signed Certificate Creates a self-signed certificate. Request a certificate Creates data for requesting that a certificate be issued from a certificate authority. Install a certificate Installs the certificate issued by the certificate authority. Set a Encryption Strength Specifies the encryption level. In addition, SSL/TLS can be disabled.
Item Description Mode Using SSL/TLS Specifies the SSL transmission mode. " If no certificate is installed, this item does not appear. Next button Click to display the selected page. Cancel button Resets all configuration settings to previous values. Logout button Logs out of Administrator Mode and returns to User Mode.
The Network - SSL/TLS - Self-signed Certificate Setting page allows you to create a certificate and specify SSL settings. Item Description Common Name Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is comprised of "Printer Host Name.DNS Server". If DNS Server is un-available, only the host name is used as Common Name. " This text is read-only. Organization Specify the name of the group or organization.
Item Description Encryption Strength Specify the encryption level. Choices: -3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits -RC4_128bits, DES_56bits or RC4_40bits -DES_56bits or RC4_40bits Default: 3DES_168bits,RC4_128bits, DES_56bits or RC4_40bits Create button Creates the self-signed certificate. " A few minutes are needed in order to create the certificate. Back button Click to return to the SSL/TLS Setting page.
The Network - SSL/TLS - Request a Certificate page allows you to configure the following items: Item Description Common Name Identifies the Common Name for the printer, to be used in creation of an SSL Certificate. It is comprised of "Printer Host Name.DNS Server". If DNS Server is un-available, only the host name is used as Common Name. " This text is read-only. Organization Specifies the name of the group or organization.
Certificate Request The Network - SSL/TLS - Certificate Request page displays the data that will be submitted to the certificate authority to request that a certificate be issued. Item Description Certificate Request Displays the data that should be submitted to the certificate signing authority. This is called CSR (Certificate Signing Request). This data is to be submitted to the certificate signing authority by the user.
Install a Certificate The Network - SSL/TLS - Install a Certificate page allows you to install the certificate issued by the certificate authority. 244 Item Description Install a Certificate Signed CSR (Certificate Signing Request) should be pasted to this text area. Next button Click to display the Encryption Strength Setting page. Back button Click to return to the SSL/TLS Setting page. Cancel button Click to cancel the entered data and return to the SSL/TLS Information page.
Encryption Strength Setting The Network - SSL/TLS - Encryption Strength Setting page allows you to specify the encryption level. Item Description Encryption Strength Specify the encryption level. Choices: 3DES_168bits, RC4_128bits, DES_56bits or RC4_40bits RC4_128bits, DES_56bits or RC4_40bits DES_56bits or RC4_40bits Default: 3DES_168bits,RC4_128bits, DES_56bits or RC4_40bits Create button Click to specify the encryption level.
Remove a Certificate The Network - SSL/TLS - Remove a Certificate page allows you to delete the installed certificate. 246 Item Description OK button Click to display a confirmation message. Click OK in the confirmation message to delete the certificate. Back button Click to return to the SSL/TLS Setting page. Cancel button Click to return to the SSL/TLS Information page. Logout button Logs out of Administrator Mode and returns to User Mode.
Mode using SSL/TLS The Network - SSL/TLS - Mode using SSL/TLS page allows the SSL transmission mode to be specified. Item Description Mode using SSL/TLS Selects the SSL transmission mode. Choice: Disable, Enable Default: Disable. Apply button Click to apply the setting specified beside “Mode using SSL/TLS”. Back button Click to return to the SSL/TLS Setting page. Cancel button Click to return to the SSL/TLS Setting page. Logout button Logs out of Administrator Mode and returns to User Mode.
Log Accounting Page If the optional hard disk drive is installed on the printer, printer account information can be specified from the Log Accounting page. Job (shown above) The Log Accounting - Job page allows you to save the job information for the printer as a file. 248 Item Description Number of the By Number record to retrieve as a file Select the number of jobs to be retrieved and saved as a file.
Index A C Active job list, PageScope Web Connection Print job status 158 Administrator mode, PageScope Web Connection 144 Alert mail, PageScope Web Connection 188 AppleTalk 12, 123 AppleTalk, PageScope Web Connection 234 Certificate request, PageScope Web Connection 243 Chooser 48 Clear settings, PageScope Web Connection 186 Color profile, PageScope Web Connection 173, 215 Configuration Network settings 108, 217 Printer, via PageScope Web Connection 176 Consumables, PageScope Web Connection 155 Counter,
D Date/Time, PageScope Web Connection 176 DDNS 124 Desktop printer utility 51 Details, PageScope Web Connection 149 Done job list 160 Paper source 149 Device information, PageScope Web Connection 148, 180 Device status, PageScope Web connection 147 DHCP 111, 117, 124 Direct Print, PageScope Web Connection 175 Done job list, PageScope Web Connection 159 Download Manager Utility 106 E Email, PageScope Web Connection 235 Encryption strength setting, PageScope Web Connection 245 Ethernet interface 117 Ethernet
PPD file, installing 79 Print settings 88 Printer driver settings 82 System requirements 78 Troubleshooting 93 Local interface, PageScope Web Connection 191 Log Accounting, PageScope Web Connection 248 Job 248 LPD/LPR 125 M Mac OS 9 Chooser 48 Desktop printer utility 51 Options 48 Page setup settings 54 Printer driver, installing 47 System requirements 46 Troubleshooting 75 Mac OS X Options 20 Page setup settings 22 Print settings 25 Printer driver, installing 3 Printer setup utility 7 Printer setup utilit
Counter 156 Current status 144 Date/Time 176 Details 149 Device information 148, 180 Direct Print 175 Display language 138 Done job list 159 Email 235 Encryption strength setting 245 Form overlay 172, 214 FTP 231 General settings 161, 192 Hard disk 152 Install a certificate 244 Interface information 153 Job 158 Local interface 191 Mode using SSL/TLS 247 Navigation 143 NetWare 224 Online assistance 157, 158 Output tray 151 Paper source 149 Paper source settings 163, 195 PCL font 170 PCL settings 164, 199 Pri
PS font, PageScope Web Connection 171, 213 PS settings, PageScope Web Connection 165, 201 R Remove a certificate, PageScope Web Connection 246 Rendezvous 223 Report types, PageScope Web Connection 174 Request a certificate, PageScope Web Connection 241 Reset printer, PageScope Web Connection 187 ROM version, PageScope Web Connection 183 S Self-signed certificate setting, PageScope Web Connection 239 SLP 125 SMB 126 SMB, PageScope Web Connection 233 SMTP 126 SNMP 126 SNMP, PageScope Web Connection 232 SSL/
254 Index EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
