User`s guide

Clearing Media Jams
91
2 Pull out the jammed media.
Even up the front edges of the
media currently in the tray.
3 Remove any remaining media from
the printer.
4 Open the front cover (button A
, ).
5 Check for any media scraps inside
the printer.
6 Close the printer’s cover.
7 Reinsert the media in the tray
printing face up.
Attention
Make sure the media doesn’t exceed the media limit mark. Check to
see if the media width guides are correct.
8 Slide the tray(s) back into the
printer.
The media jam display is cleared.
A
2
1
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]