User`s guide

Loading Media
39
5 Load the postcard media
printing-side down in the
multipurpose tray.
6 Adjust the media guides to the
width of the postcards.
7 Print the postcards.
How do I load and print thick stock?
Attention
Do not mix thick stock with any other media in the same tray, as this will
cause printer jamming.
 Most thick stock printing is supported from any inputbin. However,
media type “Thick 3” can be printed only from the multipurpose tray.
1 In the printer driver (Paper tab, Media Type option), select Thick 2 (105–
162 g/m
2
).
2 Remove any media in the media tray.
3 Load the new media.
4 Slide the media tray back into the printer.
5 Print the thick stock.
How do I load and print transparencies?
Attention
Use only transparency media approved for this printer. Check
printer.konicaminolta.net/support
(click on Answer Base) for currently
approved media.
1 In the printer driver (Paper tab, Media Type option), select Transparency
and (Paper tab, Paper Size option), select either Letter or A4.
2 Select the size of transparency in one of the following ways:
 Multipurpose Tray—Press the MP Size key and scroll to the
required transparency size and select it, or
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]