User`s guide

Media
25
Special Note about Custom (and Oversized) Media
When printing on media that is longer than 14"/355.6 mm, use the multipur-
pose tray extender and support the media with your hands underneath while
it feeds through the multipurpose tray.
Thick Stock
Approved
Media
Use only media approved for laser products. Check
printer.konicaminolta.net/support
(click on Answer Base) for
currently approved media.
Weight 16–28 lb bond (60–105 g/m²)
Duplexing Supported up to 28 lb bond (105 g/m²).
Warning Using unsupported media such as ink jet paper will result in
damaging the printer and voiding your warranty.
Notes *For A5-size media, load up to 350 sheets only.
Printing a glossy (shinier) image on plain paper (Glossy
Plain media type) is less expensive.
Input Tray Multipurpose tray only
Capacity Up to 50 sheets, depending on the thickness of
the media
Orientation Face down
Weight Varies
Print Mode
to Select
Plain Paper
Duplexing Not supported
Notes  Width: 3.5"/88.9 mm up to 8.5"/215.9 mm
 Length: 5.5"/139.7 mm up to 35.4"/900 mm
 On media that is longer than 14"/355.6 mm, the printer
pauses for a calibration after every page.
Media Type Thick 2
Thick 3
Input Tray Thick 2—all input sources
Thick 3—multipurpose tray only
Capacity Up to 50 sheets, depending on the thickness of
the media
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]