User`s guide

Installing Printer Drivers and Utilities, Macintosh8
the Macintosh and the other end of the second into the printer’s
Ethernet port.
b Locate the Desktop Printer Utility.
 If you cannot locate it on your Macintosh hard disk, it can be
found on your Macintosh’s system CD-ROM.
c Select Printer (LPR), and select OK.
d Type in the IP Address and use the same address for the Queue
name. Click OK.
e Choose Create.
f Name the printer with the IP Address or a descriptive name.
OS 9 Step 3. System Software
a
Insert the Software Utilities CD-ROM in your Macintosh’s CD-ROM
drive.
 If the CD-ROM does not start automatically, double-click the
CD-ROM icon on your Macintosh desktop.
b Double-click the Resources icon.
c Double-click the System_Code folder, and then locate the system
software file (system.ps where system is the filename).
d Drag the system.ps icon and drop it on the magicolor 3300 printer icon
on your desktop to perform the system software upgrade.
 If your printer’s system software version is later than the
version on the CD-ROM that you are downloading, an error
page will print on the printer. In this case, go to step e. You do
not need to upgrade the printer’s system software.
e When the system software installation is complete, remove the
CD-ROM from your CD-ROM drive and store it in a safe place.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]