User`s guide

Status, Error, and Service Messages122
PUT <TYPE
MEDIA> IN
<INPUT> BIN
Operator Control/Chain
Inputbins is set to On
and a chained tray is
empty.
Refill the tray with the
specified type media.
PUT <X> IN
INPUT <Y>
The <X> specified
media is not in the input
tray <Y>.
Refill the tray with the
specified type media.
REPLACE <X>
The specified item <X>
needs to be replaced,
such as the fuser unit,
the transfer unit, and the
imaging unit.
Replace the specified
item.
RESETTING ACC
TO INITIAL
STATE
The accounting files
have been reset.
No action needed.
RESETTING
ACCOUNTING
The reset accounting
operation is in process.
Wait. No other action
needed.
SYS UPDATE
ERROR <X>
The indicated error <X>
has been reported.
Verify the update
file and send it
again or check with
printer.konicaminolta.net/
support (click on Answer
Base) for the latest code
update.
TRANSFER UNIT
MISSING
The transfer unit isn’t
installed correctly.
Remove and reinstall the
transfer unit.
WAITING FOR
IDLE
An active job is in pro-
cess. Access to the
menu is not allowed
until the job is finished.
Wait until the print job is
finished and the printer
goes idle.
WARMING UP
The printer is warming
up and getting ready to
go online.
Wait. No other action
needed.
This message... means... do this...
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]