User`s guide

Clearing Media Jams96
3 Remove the jammed media from the
registration rollers .
Remove any torn pieces of paper still
in the printer .
Attention
Be careful not to touch the transfer
drum while removing jammed
media.
4 If the jam message is still displayed,
remove each media tray.
a Release the two hooks securing the
chute assembly inside the tray
compartment.
b Turn the chute assembly 90°
toward the rear of the printer.
c Remove the jammed media.
d Close the chute assembly.
e Repeat for all media trays, if
necessary.
6 Slide the tray(s) back into the printer.
7 Close the front cover.
1
2
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]