Installation guide

Warranty Considerations
31
English
Attention
Don’t return any merchandise to the manufacturer without calling for a
Return Merchandise Authorization (RMA) number (Americas only).
Refer to the Service & Support Guide or printer.konicaminolta.net/
support for the Technical Support telephone number where you can
obtain an RMA number. If the RMA number is not prominently visible on
the outside of items returned, KONICA MINOLTA will not accept receipt.
These Actions Will Result in Voiding Your Warranty
Print Media  Use of nonsupported transparency (OHP) media,
such as coated color transparencies.
 Use of other nonsupported print media, such as ink
jet paper.
See chapter 2, “Using Media,” in the User’s Guide for
information about media. Check printer.konicaminolta.net/
support (click on Answer Base) for currently approved
media. To order approved transparencies, go to
www.q-shop.com
.
Electrostatic
Discharge
Failure to protect the printer controller board and any
associated daughterboard or module from electrostatic
discharge or damage while performing any task involving
the controller board.
Instructions Failure to follow instructions in the printer documentation.
Modifications Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for
compliance to Federal Regulations could void your
authority to operate this product within the Laws and
Regulations of the Federal Communications Commission.
Consumables Use of consumables not manufactured or supported by
KONICA MINOLTA. Any damage to the printer or quality
problems caused by a refilled toner cartridge use.
Imaging Unit or
Transfer Roller
Any damage resulting from mishandling the imaging unit
(including its four OPCs) or the transfer roller.
Accessories Use of accessories not manufactured/supported by
KONICA MINOLTA.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]