Installation guide

Installing Accessories14
English
2 Adjust the media guides to fit the paper
size you’re loading.
The tray extender supports long media.
3 Fan a stack of approximately 100
sheets of paper.
A fill limit mark is provided on the inside
of the tray.
Attention
Do not overfill the tray. The paper should fit easily between the
guides. Improperly adjusted guides may cause poor print quality,
media jams, or printer damage.
4 Align the edges of the paper, and then
load it with its printing side up and short
edge toward the printer.
Often, an arrow on the media package
label indicates the printing-side of
the media.
5 Make sure the media fits properly in
the tray.
Installing Accessories
Attention
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
If you purchased any additional printer accessories (such as a high-capacity
input feeder or additional memory), then install them now. If installation
instructions are included with the accessory, follow them. If not, instructions
are included in the User’s Guide (on the Documentation CD-ROM).
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]