Installation guide

Setting up Your Printer
7
English
2 With another person’s help, lift
the printer from the carton.
Do not tilt it more than 10° in
any direction at any time.
For best output quality and
longest consumables life, place
the printer on a hard, flat, level,
stable surface capable of
supporting about 77 lbs (35 kg).
3 Remove the tape from the outside of the printer.
Attention
Do not plug in the power cord until told to do so.
Installing the Imaging Unit
Attention
The OPCs are extremely sensitive to bright light, direct sunlight, and
touch. Always leave the imaging unit in its protective bag until you’re
ready to install it. Any exposure to light should be limited to less than
two minutes, or permanent damage could result.
Front
Hand grips
The imaging unit contains four OPCs (Optical
Photo Conductors) and developers, and an imag-
ing unit transfer roller that form the image that is
developed and transferred to the media.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]