User`s guide

Replacing Consumables
95
English
Installing the New OPC Drum Cartridge
Attention
The OPC drum is extremely sensitive to bright light and direct sunlight.
Always leave it in its protective bag until you are ready to install it. Any
exposure to light should be avoided, or permanent damage could
result.
Any damage resulting from mishandling of the OPC drum will void the
drum’s warranty. Also, handle the cartridge carefully by its sides so you
don’t touch the surface (the green part) of the drum. The drum is also
extremely sensitive to hand oils and scratches, both of which reduce
print quality.
1 Remove the new OPC drum cartridge
from its carton.
Attention
Keep the protective sheet on the cartridge. Do not touch the
protective sheet on the photosensitive (green) surface or scratch the
surface. This could lower image quality.
Make sure the transfer belt release lever is still set to its top position
(11 o’clock).
2 Holding the OPC drum cartridge
level, place the front end of the OPC
drum cartridge installation guide into
the installation rail.
3 Carefully push the OPC drum
cartridge in.
When installing the OPC drum
cartridge, be sure not to press on the
release lever. If the lever is pressed
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]