User`s guide

Duplexing36
English
Printer Driver
On the Paper tab’s Paper Size drop-down list, choose Custom. A Configure
button appears at the right of the drop-down list. Choose Configure and enter
the length and width of your media in the dialog box.
1 Set the option for Tray 1 Media Size to Custom, using either the printer’s
control panel or PageScope Light.
2 Set the Custom Size Width and Length to match the size of the media in
Tray 1. This option can also be set using either the printer’s control panel
or PageScope Light.
3 Set the media size in the printer driver.
 Sizes set in the driver need to match the sizes set for the printer
through the control panel or PageScope Light.
Duplexing
How do I print on both sides of the paper (duplex)?
Select paper that is opaque enough to block out what’s printed on one side
from being seen on the other side. For best results, print a small quantity to
make sure the paper and print quality are acceptable.
Check your application for margin information.
Duplex (2-sided) printing can be done manually or, if you have the duplex
option installed and selected, it can be done automatically.
A
ttent
i
on
Only plain paper up to 24 lb (90 g/m²) can be duplexed.
Duplexing envelopes, labels, postcards, thick stock over 24 lb (90 g/m²),
or transparencies is not supported.
How do I manually duplex?
 Media jams may occur if the printed sheet(s) are not reinserted
entirely flat.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]