User`s guide

Media Types
23
English
 Too thin or too thick
 Stuck together with static electricity
 Composed of foil or gilt; too luminous
 Heat sensitive or cannot withstand the fusing temperature (356° F/180° C)
 Irregularly shaped (not rectangular or not cut at right angles)
 Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
 Acidic
 Any other media that is not approved
Plain Paper
Envelopes
Your printer receives the instructions to print on envelopes from your
application. See your application documentation for specific information on
printing envelopes.
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these
layered regions may be lost or faded.
Capacity Tray 1
(multipurpose
tray)
200 sheets of 22 lb bond (80 g/m2) paper;
capacity for other weights varies accordingly.
Tray 2
(optional lower
feeder unit
media tray)
500 sheets of 22 lb bond (80 g/m2) paper
(letter/A4); capacity for other weights varies
accordingly.
Orientation Face up
Ty pe Check printer.konicaminolta.net/support
(click on Answer
Base) for currently approved media.
Driver Mode Plain paper
Weight 16–24 lb bond (60–90 g/m²)
Duplexing See page 21 for supported sizes.
Capacity Tray 1 Up to 50 envelopes, depending on their thickness
Tray 2 Not supported
Orientation Face up
Ty pe Check printer.konicaminolta.net/support
(click on Answer
Base) for currently approved media.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]