User`s guide

Repacking the Printer172
English
F. Remove the Transfer Belt
1 With the front door open and transfer belt release lever at its top
(11 o’clock) position, loosen the two thumbscrews.
2 Grasp the transfer belt and pull
it straight out and then lift it up.
3 Place the transfer belt and
thumbscrews in the protective
bag supplied in the repacking kit
(magicolor 2300 Series
Repacking Kit 2600733-100).
4 Replace the packaging and
tape, then close the front door.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]