User`s guide

Repacking the Printer
167
English
B. Remove the Media and the Tray 1 Media Support
1 Remove the media.
Place it in its original packaging and store in a cool, dark place on a level
surface. Avoid moisture, excess humidity, direct sunlight, excess heat
(above 95° F/35° C), and dust.
2 Lift the media support from the three
holes in Tray 1 and remove the
media support.
C. Remove the Options (if Attached)
Duplex Option
 If you don’t have a duplex option installed, skip to the next section.
1 If you have a lower feeder unit
attached, you first need to open the
lower right-side door.
2 Pull the right-side door release
lever, and open the right-side door.






EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]