User`s guide

Optional Lower Feeder Unit and Tray 2156
English
8 Reconnect the power cord, and turn on
the printer.
 In compliance with UL guidelines,
“The appliance inlet is considered
to be the main disconnect
device.”
9 Check the configuration page from the
control panel (Print Menu/Configuration
Page) to verify the duplex option installation.
10 On the Settings tab of your printer driver, move the Optional Duplexer to
the Installed Features area. (See Chapter 4).
Optional Lower Feeder Unit and Tray 2
The optional lower feeder unit fits under the printer and increases your
printer's media feed capacity by 500 letter/A4 sheets through Tray 2.
Kit Contents
 Lower feeder unit with a media tray (500-sheet capacity)
 Three metal brackets
– Two front brackets
– One rear bracket
 Two securing screws
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]