User`s guide

Duplex Option
155
English
d Open the duplex option’s cover
and tighten the two thumbscrews
that came with the duplex option
to secure the unit to the printer.
e Close the duplex option’s cover.
6 Attach the support wire for the
duplex option to the printer.
a Pull the right-side door release
lever and open the right-side
door.
If you have a lower feeder unit
attached, you will first need to
open the lower right-side door.
b Pull the tab for the support wire
on the right side of the duplex
option, and then hook the wire
onto the hook of the printer.
c Close the right-side door.
7 Reconnect interface cable.






EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]