User`s guide

Introduction148
English
Introduction
Attention
It’s very important to protect the printer controller board and any
associated daughterboard or module from electrostatic damage while
performing any task involving the controller board.
Attention
Use of accessories not manufactured/supported by KONICA MINOLTA
is not supported by your printer and will void your warranty.
This chapter provides information about the following accessories. Contact
your local vendor or www.konicaminolta.net/printer/
for compatibility and
purchase information.
These accessories are also supported. Check www.konicaminolta.net/printer/
for information about additional accessories.
Attention
Installing accessories always requires that the printer and accessories
are turned off and unplugged during installation.
Dual In-Line Memory
Modules (DIMMs)
64, 128, or 256 MB PC-100- or PC-133-Compliant
SDRAM DIMM, up to a maximum of 384 MB.
Duplex Option Automatic duplexing
Lower Feeder Unit 500-sheet media tray included
Internal Hard Disk Kit 6 GB or larger hard disk and daughterboard
Internal Hard Disk
Daughterboard Kit
Daughterboard for installing internal hard disk
Buzzbox Via parallel port (US only)
Wireless Interface 802.11b or Bluetooth via parallel port
Network Option Token-Ring via external connection
Convenience Copier SC-215 via parallel port
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]