Installation guide

About the Interface Panel16
English
3 Turn on the printer.
After approximately 180 seconds, the printer
prints a startup page and then displays
MAGICOLOR 2350/IDLE in the message
window. If MAGICOLOR 2350/IDLE does
not display in the message window, recheck
the setup.
The printer automatically switches to power-saving (Energy Saver) mode
after 30 minutes of inactivity. You can change the number of minutes in
the System Default/Energy Saver menu.
Attention
Never turn off or unplug the printer while it is receiving data or printing.
About the Interface Panel


 Parallel Port
Use a Centronics IEEE 1284 bidirectional parallel cable when connecting the
parallel port on the printer to the parallel port on your computer.


 Ethernet Port
Use a twisted-pair (RJ45) Ethernet cable when connecting the Ethernet port
on the printer to a 10BaseT/100BaseTX network connection.


 USB Port
Use a USB cable (Type B) when connecting the USB port on the printer to the
USB port on your computer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]