Installation guide

Setting up Your Printer10
English
Setting up Your Printer
WARNI NG!
Your printer weighs approximately 62 lbs (28 kg) with consumables. Be
sure to have help when lifting and moving it.
Do not plug in the printer until told to do so.
Shipment Contents
 Printer (with four toner cartridges and an OPC drum cartridge
installed)
 Waste toner bottle
 Media support for Tray 1
 Power cable
 Software Utilities and Documentation CD-ROMs
Interface cables are not included in the shipment. If you need cables,
contact your local vendor or computer store.
Unpacking the Printer
 We strongly suggest that you save the
packaging materials in case you ever
need to move or ship the printer.
Use the following instructions to unpack your
printer.
1 Remove the protective plastic cover.
2 With another person’s help, lift the printer
from the carton. Do not tilt it more than ±1° in
any direction at any time.
For best output quality and longest
consumables life, place the printer on a hard, flat, level, stable surface
capable of supporting about 62 lbs (28 kg).
3 Remove the tape from the
outside of the printer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]