Operation Manual

A
SSMANN Electronic GmbH I Auf dem Schüffel 3 I 58513 Lüdenscheid I Germany
E-Mail: [e-mail] I Internet: www.assmann.com
PAGE 18 USER GUIDE
A
DD CAMERA
10. Add camera
10.1 With your smartphone/tablet
Click on the "ednet IP camera" app under "WAN" on the "+" symbol in order to add your
camera.
This is easily done by scanning the QR-code with your smartphone/tablet or through manual
entry of the activation data.
The following devices are suitable for scanning the QR-code:
Apple iPhone™, Apple iPad™, Android Smartphone, Android
Tablet (with integrated back camera).
The camera ID and the access password as well as the QR code can be found on the enclosed
camera registration card.
10.2 Adding the camera by scanning the QR-Codes
Android devices show a grid on the display. Move the camera forward or backward until the
QR-code fits into the grid.
Apple iOS™ devices do not show any grid. To scan a QR-Code with an Apple iOS™ device,
you may need to move the device backward and forward a couple of times, until it recognizes
the code.
10.3 Add the camera with manual input of the camera ID & access
password
The camera ID and the access password are on the enclosed
camera registration card. Under "camera alias" please enter a name
for the camera, and after that, please enter the "camera ID" from the
card into the "camera ID" field. Please enter the "login password"
from the card into the "access password" field.
After adding the camera, please check in the camera list in App
whether your camera is listed under WAN.