AMBIENT LED MOOD LIGHT WITH BLUETOOTH® SPEAKER Manual 33040
Be sure to aware the following guidelines when using 33040 1. To turn on the power switch at the bottom of 33040 There are 3 functions (Diagram 3): Left: BLUETOOTH® speaker on Middle: Table lamp usage (Controlling different colors of LED light) Right: Off Power 2. Touch or slide the control key of LED light (Diagram 1) – “color control” to adjust the brightness of the lamp 3. Touch one time on “Mode key” for white light only Touch twice on “Mode key” for the colors of LED light. 4.
OPERATING INSTRUCTIONS Function of table lamp ON/OFF ON: Switch to the middle “light bulb” on the button, 33040 will apply to the table lamp function. In addition, the LED indicator lights (below picture) and the table lamp will light-up for 2 seconds at the same time, and then the lights off. OFF: Please do a long pressing the on/off key for 1~2 seconds to turn off. Charging When 33040 is out of battery, the indicator light and table lamp will not shine.
Function of BLUETOOTH® There is a sound indication when the device is switched to BLUETOOTH® mode. Then a pairing name of 33040 would be shown on the smart devices such as mobile phone or tablet PCs. Attention 1. Please charge the product before use. Do not charge while using BLUETOOTH® status. In this state, the charging time will be extended. 2. Please do not place the product close to the fire or water to avoid unnecessary accidents 3. Please charge fully, if it doesn’t use for a long time.