Specifications

3023 Operation and Maintenance Manual EDL Displays, Inc. February, 2006
12
Keys:
AUTO Press to perform an automatic adjustment
procedure. Only applicable for analog RGB
source modes.
SOURCE 1
st
button press displays the current source. 2
nd
button press searches for the next available input
source in the following order:
1. Digital RGB
2. Analog RGB
3. Composite Video
4. S-Video
After S-Video the cycle starts over at Digital RGB.
Note: When either the Main Menu or Quick Menu is activated, the
SOURCE button acts like the EXIT button to exit the menu or to move
up a level.
MENU Press to enter the Main Menus or move down to a
submenu in the Main Menu.
EXIT Leave the menu or move up a level out of a
submenu. (IR only – use the SOURCE button to
perform this function on the keypad)
UP Navigate the menu functions
DOWN Navigate the menu functions
LEFT Navigate the menu functions and select displays
settings
RIGHT Navigate the menus function and select display
settings
Main Menu
If the MENU button is pressed while no OSD is active, the Main Menu
will be activated. The Main Menu consists of 3 submenus: PICTURE,
OSD and UTILITY. Use the LEFT or RIGHT buttons on either the IR
remote controller o the keypad to select eh submenu. The DOWN or
MENU button will enter the selected submenu.
PICTURE Submenu
The PICTURE submenu contains different functions depending on the
current source selection. If the current source is Digital RGB or Analog
RGB, then the PICTURE submenu contains the following functions: