User manual

HARDWARE DESCRIPTION
3.4.3 MULTIMODE FIBER OPTIC INTERFACE BOARD
Description
Single, full duplex, multimode, fiber optic port with ST connectors with positive or negative logic.
Hardware settings
For proper functioning of that board, optic logic must be set:
Fiber optic logic settings
Switch SW1 Light in idle state 1 2 3 4
Positive logic OFF
OFF ON OFF ON
Negative logic ON
ON OFF ON OFF
Company: Device: Document: Code: Version: Date: Page:
Ediseja 21 CMU 100 / 2.6.6.6.6.1.1.1.1 - 7 User manual CMUMU261 V1 05.11.2014 11
Picture 4: Multimode fiber optic interface board appearance