User guide

ProductionVIEW Precision Camera Controller
ProductionVIEW Precision Camera Controller Manual 341-770 Rev. C Page 5 of 16
Figure 4:
Multiple Vaddio WallVIEW™ PRO camera systems connected to Precision Camera Controller – up to seven (7) cameras may be
connected. Precision Camera Controller is configured in Edirol Mode (4HD – 3SD). The Edirol V-44SW inputs are controlled from
the Precision Camera Controller’s Control A/B buses through an RS-232 connection between devices.
NOTE: If an external switcher is connected to Precision Camera Controller, you cannot use the system in “Dual Link” mode, with
two Precision Camera Controllers connected to each other (see Figure 7).
HD Video
RS-232
Cat. 5
Edirol V-44SW
RS-232
RS-232 Control
Codes for Edirol
V-44SW mixer
can be loaded
into Precision
Camera
SD Video
ProductionVIEW
Precision Camera Controller