USB Audio Interface/ MIDI Keybroad Controller PC-80 Owner's Manual
Table Of Contents
- USING THE UNIT SAFELY
- Important Notes
- Contents
- Contents of the package
- Names of things and what they do
- Setup
- Operation
- Appendix
- Using the PC-80 as a MIDI controller keyboard
- Basic connection example and signal flow
- The PC-80’s basic operating modes
- Transmitting various MIDI messages from the PC-80
- Setting the MIDI transmit channel
- Selecting sounds—Transmitting Program Change and Bank Select Massages
- Starting/stopping playback data—Transmitting a Start/Stop/Continue message
- Transmitting messages to an external MIDI sound module
- Setting the split points
- Using the VALUE encoder to transmit values for a specified parameter
- Using the PC-80 as a MIDI interface
- Using the PC-80 as an audio interface
- System settings for the PC-80
- PC-80 driver settings
- Troubleshooting
- Driver-related problems (Windows)
- Can’t record or play back audio or MIDI/No sound
- Noise or pops are heard when recording/playing on your computer
- Noise or distortion occurs when the PC-80 is not connected to your computer
- The sound is too weak
- Problems with the PC-80 Software Synthesizer
- Won’t start up
- The menu does not appear correctly (can’t select it)
- No sound
- Sound is too loud/too soft
- Clicks, pops, or noise occurs in the sound
- Sounds you play from the keyboard are delayed
- Can’t control sounds or parameters from the PC-80
- Can’t play back song data/Playback is incorrect
- Can’t use the PC-80 software synthesizer from other software
- Uninstalling the PC-80 software synthesizer
- MIDI implementation
- Main specifications
- Index
- Using the PC-80 as a MIDI controller keyboard
78
Using the PC-80 as a MIDI controller keyboard
When you operate the VALUE encoder in
Controller mode
(p. 67), values for the specified
parameter will be transmitted.
fig.memory-1_80
fig.util
1
Simultaneously press the
MIDI CH
button and
PGM CHANGE
button.
The
MIDI CH
button and
PGM CHANGE
button will light, and you will be in
Controller mode.
2
Operate the
VALUE encoder
.
Values for the specified parameter will be transmitted.
Using the VALUE encoder to transmit values for a
specified parameter
PLAY
CONTROLLER
A specified parameter
The instrument can be set so values for a certain parameter you specify are transmitted when you
operate the PC-80’s VALUE encoder.
To specify the parameter
In Utility mode, use System Settings to specify the parameter to be assigned to the VALUE
encoder.
“System settings” (p. 89)
21
PC-80_e.book 78 ページ ２００５年１１月１０日 木曜日 午前１１時３４分