USB Audio Interface/ MIDI Keybroad Controller PC-80 Owner's Manual

ManualsBrandsEdirol ManualsNetwork CardPC-80

Table Of Contents

Using the PC-80 as a MIDI controller keyboard

■

Transmitting a bank select MSB message

Here’s how to transmit a

bank select MSB (#CC00) message

on the

Current channel

(p. 62).

The

bank select LSB

and

program change message

you most recently transmitted

(specified) as described in “Transmitting a bank select LSB message” (p. 65) and “Transmitting

a program change message” (p. 64) will also be transmitted.

fig.BANK-1_75

fig.util*

Simultaneously hold the

[MIDI CH]

button and

[PGM CHANGE]

button down.

The display will indicate “UTL,” and the PC-80 enters UTILITY mode.

Press

[BANK MSB]

key.

fig.BANK-2

Use the

Value Encoder

or the

[0]

–

[9]

keys of the keyboard to specify the bank

select MSB that you want to transmit.

fig.enter

Press the

[ENTER]

button.

*The setting will be cancelled if you press another button instead of the

[ENTER]

button.

The

bank select MSB message

has now been transmitted.

*1 Reference

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or

mode of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the

currently set value, or will blink if the value is different.

PC-80_e.book 66 ページ２００５年１１月１０日　木曜日　午前１１時３４分