USB Audio Interface/ MIDI Keybroad Controller PC-80 Owner's Manual

53
Recording your performance in sequencer software (SONAR LE)
Now let’s connect an audio device such as a guitar or mic to the PC-80, and
record it.
When recording audio, you must set the PC-80’s Input Mode to either Line,
Guitar, or Mic, as appropriate for the device from which you’re recording.
1
Simultaneously press the PC-80’s MIDI CH button
and PGM CHANGE button, and hold them down.
The PC-80’s display will indicate “UTL”.
2
Press the [INPUT MODE] key on the keyboard.
3
Use the VALUE encoder or the [0] – [2] keys of the keyboard to choose the
setting that’s appropriate for the device that is connected to the audio input
jacks.
4
Press the ENTER button.
Recording audio from a guitar or mic
Selecting the Input Mode
Key Indication Setting Explanation
0 LINE
Choose this if an audio device or MIDI
sound module is connected
1
GUITAR Choose this if a guitar is connected
2 MIC
Choose this if a dynamic mic is connected
* The PC-80 is not compatible with the
miniature mics (condenser mics)
sometimes included with a computer or
sound card.
214
3
If you press any other
b
utton without pressing
the ENTER button, the
setting you made will be
discarded.
PC-80_e.book 53 ページ ２００５年１１月１０日 木曜日 午前１１時３４分