USB Audio Interface/ MIDI Keybroad Controller PC-80 Owner's Manual
Table Of Contents
- USING THE UNIT SAFELY
- Important Notes
- Contents
- Contents of the package
- Names of things and what they do
- Setup
- Operation
- Appendix
- Using the PC-80 as a MIDI controller keyboard
- Basic connection example and signal flow
- The PC-80’s basic operating modes
- Transmitting various MIDI messages from the PC-80
- Setting the MIDI transmit channel
- Selecting sounds—Transmitting Program Change and Bank Select Massages
- Starting/stopping playback data—Transmitting a Start/Stop/Continue message
- Transmitting messages to an external MIDI sound module
- Setting the split points
- Using the VALUE encoder to transmit values for a specified parameter
- Using the PC-80 as a MIDI interface
- Using the PC-80 as an audio interface
- System settings for the PC-80
- PC-80 driver settings
- Troubleshooting
- Driver-related problems (Windows)
- Can’t record or play back audio or MIDI/No sound
- Noise or pops are heard when recording/playing on your computer
- Noise or distortion occurs when the PC-80 is not connected to your computer
- The sound is too weak
- Problems with the PC-80 Software Synthesizer
- Won’t start up
- The menu does not appear correctly (can’t select it)
- No sound
- Sound is too loud/too soft
- Clicks, pops, or noise occurs in the sound
- Sounds you play from the keyboard are delayed
- Can’t control sounds or parameters from the PC-80
- Can’t play back song data/Playback is incorrect
- Can’t use the PC-80 software synthesizer from other software
- Uninstalling the PC-80 software synthesizer
- MIDI implementation
- Main specifications
- Index
- Using the PC-80 as a MIDI controller keyboard
103
PC-80 driver settings
10
Specify a name for each
new external device
.
1.
Click
Show Info
.
2.
Enter a name in the
Device
Name
field. For each
new
external device
, enter the
following names.
11
Using your mouse, drag the
▼
and
▲
symbols that indicate the output and
input of the
PC-80
icon and the
new external device
icons so that they are
connected as shown in the illustration below.
12
Click
Test Setup
.
The mouse cursor will change to a shape.
13
Try playing the keyboard of the PC-80.
If the
▲
in the diagram blinks, the settings are correct.
14
Click
Test Setup
once again to complete the check.
15
Close the
Audio MIDI Setup
dialog box.
First new
external device
Second new
external device
Third new
external device
Fourth new
external device
Device
Name
PC-80 Keyboard
PC-80 Synth PC-80 Player
PC-80 MIDI
OUT
12,14
11
Click
blink
13
Drag with mouse
to connect
If the software you’re
using allows you to make
MIDI and audio input/
output settings, select the
PC-80. For details, refer to
the owner’s manual of the
software you’re using.
PC-80_e.book 103 ページ ２００５年１１月１０日 木曜日 午前１１時３４分