WP-S1000 Wireless Projector Server Quick Installation Guide Version: 1.
Multi-Languages QIG in Driver CD ================================================ Český: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači Deutsch: Finden Sie bitte das deutsche QIG beiliegend in der Treiber CD Español: Incluido en el CD el QIG en Español Français: Veuillez trouver l’français QIG ci-joint dans le CD Italiano: Incluso nel CD il QIG in Italiano Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n Nederlands: De nederlandse QIG treft u aan op de bijgeslote
Index 1. PRODUCT INTRODUCTION...................................................................................2 2. PACKAGE CONTENTS...........................................................................................3 3. INSTALL YOUR WIRELESS PROJECTOR SERVER (WPS) ................................3 Step 1) Hardware Installation.............................................................................4 Step 2i) Make software USB Flash (PnS Token) by yourself ..........................
English 1. PRODUCT INTRODUCTION Thank you for purchasing Edimax WP-S1000, which is a Wireless Projector Server (WPS) can connects to any projector via a standard VGA interface. WP-S1000 allows multiple users one-click access wirelessly to a projector for hassle-free, cable-free of presentations. Beside, WP-S1000 provides many powerful functions, such as: Plug and Show (PnS) installation software, dynamic login code, Video Streaming Playback and a friendly web-based user interface.
2. PACKAGE CONTENTS Before you unpack the package and continue with installation, please check the contents inside the package. If any item is missing, please return the package to the dealer of purchase.
Step 1) Hardware Installation 1. Use the mounting bracket and screws to mount the Wireless Project Server (WPS) on the wall. (Skip this step if this is not required.) 2. Connect the supplied antenna to the antenna connector located at the back of the WPS (labeled as ‘ANT’). Fasten and adjust the antenna to make it perpendicular to the ground. 3. Connect the video (VGA) cable of the projector to the video (VGA) port (labeled as ‘VGA’) located at the back of the WPS. 4.
Step 2i) Make software USB Flash (PnS Token) by yourself **Note: The Software USB flash disk is an option item. We recommend you to build the USB PnS Token from WP-S1000 with your USB flash disk/ pen drive by yourself. Before start making an USB Flash Disk, please follow the instruction on Quick Installation Guide page 7 to 13 “Step 2ii) Software Installation (From the WPS)”. And then, follow the instruction below to build your USB flash disk/pen drive.
2. Click ‘Flash Drive’ dropdown menu to select the drive letter that represents your USB flash disk. If you only have one flash disk inserted, setup wizard should be able to identify the USB flash disk automatically. If the USB flash disk is not correctly identified, please insert the USB flash disk once again, and click ‘Next’. 3. Setup wizard will copy all necessary files to the USB flash disk, please be patient, and do not remove the USB flash disk in this process.
Step 3i) Software Installation (Using the USB Flash) The following procedures are operated in Window Operating System. This software can be run in Windows 2000/XP/XP64/Vista. 1. Insert the USB flash into the USB port of your computer. Please make sure the wireless connection of the computer is enabled. 2. Click on ‘Start’ -> ’My Computer’. 3. A removable storage named ‘PnS Token’ will be appeared, double-click on it.
4. Double-click on ‘WP-S1000’ icon, and it will start searching for the WPS. 5. You’ll be prompted to enter Login Code, which is a 4-digit number displayed at the upper-left corner of the WPS. Enter Login Code and click ‘OK’ to connect to the WPS. You will be connected and the WPS will project your PC screen to the projector automatically.
Step 3ii) Software Installation (From the WPS) You can install the software from the WPS via wired / wireless LAN connection. (Please skip step 1 to 3 of you’re using wired LAN): 1. Right-click on wireless network icon located near the clock (usually located at the bottom-right corner of desktop), and select ‘View Available Wireless Networks’ to launch windows zero configuration utility. 2. Locate a wireless network named ‘WPS’, select it and click ‘Connect’.
3. Click ‘Connect Anyway’ when you see this message to continue. 4. Launch Internet Explorer (or other web browser like FireFox), input ‘192.168.100.10’ in address bar, and then press ‘Enter’ key.
5. Click ‘Download’ to download projector server software.
6. Click ‘Download’ to begin software download (leave password field blank). 7. Click ‘Run’ to start software installation after the download is completed.
8. When you see this security warning, click ‘Run’ to continue. 9. Click ‘Next’ to start software installation procedure.
10. You’ll be prompted to enter Login Code, which is a 4-digit number displayed at the upper-left corner of the WPS. Enter Login Code and click ‘OK’ to connect to the WPS. You will be connected and the WPS will project your PC screen to the projector automatically.
After a correct login code has been entered, a copy of the display of your computer will be displayed on the projector or CRT / LCD monitor connects to WPS. Just use the computer as usual for presentation or audio / video playback. The brief description of client software is listed as follow, for detailed description, please refer to user manual on CD-ROM.
