WP-4500K User Manual 03-2021 / v1.
Contents I. Product Information ................................................1 I-1. Package Contents ...................................................................2 I-2. System Requirement* ............................................................2 I-3. Hardware Interface ................................................................3 I-3-1. RX Overview .............................................................................. 3 I-3-2. TX Overview ...........................................
III-2-2. Resolution................................................................................ 20 III-2-3. Resolution Mode ..................................................................... 20 III-2-4. Maximum Connections ............................................................ 21 III-2-5. Android Audio Streaming ........................................................ 22 III-2-6. Display Mode ........................................................................... 22 III-2-7. Reboot Timer ..
IV-12. Airview ..........................................................................33 IV-13. Airplay Support .............................................................34 IV-14. Admin Password ...........................................................34 IV-15. Screen Saver..................................................................35 IV-16. Wi-Fi Enterprise ............................................................35 IV-17. Fixed Host .............................................
I. Product Information The WP-4500K Wireless Projection System offers efficiency and creativity with unprecedented Native 4K HD wireless presentation solution for business meetings, wedding or hug conference room. Easy plug-and-play makes group presentations possible with just one click, users can cast, interact and receive high-quality imagery over multiple types of devices (desktop, laptop, tablet and mobile). You can find all supporting documents from the link below or via QR Code: https://www.edimax.
I-1. Package Contents WP-4500K (TX) WP-4500K (RX) (USB power cable included) HDMI Cable (100 cm) HDMI Cable (30 cm) Power Adapter Kit (For WP-4500RX) Quick Installation Guide I-2. System Requirement* - Windows 7/8/10 32bit/64bit Mac 10.9 iOS 9 Android 5 *Additional version information will be announced on the EDIMAX website.
I-3. Hardware Interface I-3-1.
No. Description 1 Antenna 2 Power Jack 3 Power Button 4 USB Port 5 Ethernet Port 6 HDMI Out Port 7 Reset Button I-3-2.
I-4. No. Description 1 Main Button 2 LED 3 Side Button & LED 4 HDMI In Port 5 USB Power Cable LED Status LED Status LED Color Side Button LED Color Off N/A Green Off N/A Red On White Green On White Red On Red Red On Red Green Flashing Red Red Flashing Red Red and flashing Flashing Red Off TX OTA fails. Flashing White Off Paring is done. Flashing White Off TX OTA completes. 5 Description TX is in Host mode and not projecting.
LED I-5. Applications & Operation 1. When Host has projected on screen, and Guest required sharing the screen. Host can grant permission to the Guest.
Indicator 2 Single click to allow, double click to deny the request.
When host deny the request: (Keep full screen) 2. Host grants permission to the Guest in full screen when share screen mode is on. Host Guest Indicator 1 Long press the main button.
Indicator 2 Single click the side button.
3. Host retrieves share screen request when Guest in full screen mode. Host Guest Indicator 1 Single click the main button.
4. Host retrieves full screen request when Guest in full/share screen mode. Host Guest Indicator 1 Long press the main button.
II. Hardware Installation Please follow the steps below to install your WP-4500K projection system, II-1. RX Installation 1. Attach the power supply to the RX. 2.
3. Plug HDMI cable into both your RX and projector’s, TV's or monitor’s HDMI ports. II-2. TX Installation 1. Plug TX USB cable into your laptop USB port. 2. Plug HDMI cable into both your TX and laptop.
II-3. Share the Screen 1. Press the main button on the TX to share your laptop screen to the, TV or monitor. 2. Press again the main button to disconnect. Main button For more details, please refer to the I-5 Applications & Operation. II-4. Adding/Pairing TX and RX When you purchase another TX or RX and you try to pair the devices, please plug the TX USB cable to the RX USB port NOTE: When the SSID or secure type from RX is changed, TX and RX will be unpaired.
III.WP-4500K Web UI (Base User) WP-4500K comes with two standard access levels: Administrator and Base User. NOTE: Please login as administrator for higher level of access control. Please follow the steps below to access the WP-4500K Web UI. 1. Connect the SSID “Edimax_WHDMI” from your laptop network Wi-Fi and find the password via RX landing page. 2. Turn on web browser and enter “192.168.168.1” in the address bar.
III-1. Network Management Use the Network Management page to configure Wi-Fi settings for the WP-4500K and encryption. III-1-1. Connect to 5GHz Wi-Fi In this page you can connect WP-4500K to the internet via external Wi-Fi from the list or manually add network. Connect WP-4500K to the available SSID from the list and enter the Wi-Fi password.
17
Alternatively, you can click the “Add Network” button to manually add network. In this page you can define the encryption type in WPA/WPA2, OPEN or 802.1xEAP. III-1-2.
III-2. Device Management This page allows user to configure Language, Resolution, Resolution Mode, Maximum Connections, Android Audio Streaming, Display Mode, Reboot Timer and One Touch Play settings. III-2-1. Language Scroll down and choose your language from the list.
III-2-2. Resolution Move the slider to the resolution you want, and then click Ok. III-2-3. Resolution Mode In this page there are two modes for resolution.
III-2-4. Maximum Connections This page allows user to configure maximum connections limit for WP-4500K. Please select the applicable maximum connections for your usage. WP-4500 supports up to 32 users and the defaults maximum connection is 8 users. NOTE: Please be aware that when multiple users use a single device, more connections consume the finite bandwidth.
III-2-5. Android Audio Streaming Enable the function to allow Android users to cast video and audio to the external display. NOTE: Please be aware that the default setting of Android audio streaming is Off. III-2-6. Display Mode WP-4500 supports below Display Modes. Item Fit to screen Description Keep your original aspect ratio of the video. Takes the output resource graphics and Stretch to Full Screen stretches them across the whole screen space at the current resolution.
III-2-7. Reboot Timer WP-4500 will automatically reboot every 8 hours under the following conditions: None of the TX is connected to RX. None of the device is connected to RX, including Windows, Android, macOS, iOS. III-2-8. One Touch Play settings Allows the device becomes an active resource when pressing the button.
III-3. About Device In “About Device” page provides you with information on: 1. SSID information 2. IP address 3. MAC 4. WP-4500K’s Resolution 5. 5G Wi-Fi Channel Information 6. WP-4500K Firmware Version 7. Internet IP Information 8. LAN MAC Information 9.
IV. WP-4500K Web UI (Administrator) The Admin Setting page allows users with higher access authorization to customize WP-4500K network settings and features.
IV-1. Wi-Fi Channel In this page you can set up WP-4500k Wi-Fi Channel. Item Country Channel Bandwidth Description Please select the correct country for 5GHz channel Select a wireless channel from 36 – 165 Select the bandwidth in 20MHz or 80MHz NOTE: Please be aware that users cannot configure the Wi-Fi Channel while WP-4500 is connecting to the external internet.
IV-2. LAN IP Settings The LAN IP Settings page is used to configure the settings for LAN network, including IP address, Default Gateway, Subnet mask, DNS.
IV-3. SSID The SSID page is used to customize the SSID, including renaming, Hide SSID or Turn Off SSID. NOTE: After changing the new SSID, please reconnect WP-4500k by re-pairing the TX and RX. Item Description Specify the WP-4500K static IP address on the IP Address configuration. Specify the default gateway on the static configuration. Default Gateway The default gateway must be in the same subnet with WP-4500K IP address configuration.
IV-4. Password You can change or hide the Wi-Fi connection password on the landing page. IV-5. Sketch You can turn On/Off sketch in this page.
IV-6. Central Management System You can turn On/Off Central Management System in this page. IV-7. Conference Control This Conference Control page allows assign monitor split screen position that will appear on monitor's screen.
IV-8. My Screen The My Screen page allows users to change the theme of the main page of RX by uploading images. NOTE: Images (ONG format) size should be 1920 x 1080 resolution and 2MB in size. IV-9. Wallpaper Switch This page allows users to set wallpaper URL and check interval.
IV-10. Dynamic Wallpaper The Dynamic Wallpaper allows you to use wallpapers as native Dynamic Desktops after monitor idle for a certain number of minutes. You can set the idle time when this mode enabled. IV-11. Host Control The host control allows the 1st user to become the Host of display, all other casting requests will be transferred to Host before casting. There are also some items to be set.
IV-12. Airview The Airview page allows users to enable/disable Airview function. And you can set the number of times the monitor updates with new images each second in Refresh Rate. Item Description Auto Allow Requests The new request will be cast on screen directly. The new request will be mirrored in screen split when Share screen this function is on. The new casting will in full-screen size when this function is off.
IV-13. Airplay Support The Airplay function allows iOS /Mac users to cast without TX. IV-14. Admin Password The Admin Password page allows the users to change the password for better security.
IV-15. Screen Saver The Screen Saver page allows users to set the idle time and can be set to blank the screen after a period of user inactivity. IV-16. Wi-Fi Enterprise The Wi-Fi Enterprise page allows admin to upload Digital certificates.
Item Description Dynamic The first connected device will be set as the host. Fixed IP Assigning a specific IP address as the fixed host. Fixed device Assigning a certain device as the fixed host. IV-17. Fixed Host The Fixed Host page allows users to set a specific device as fixed host. NOTE: Please reboot your WP-4500K before new settings will take effect.
IV-18. Google Cast The Google Cast page allows users to direct casting via Chromecast for Android, macOS users. NOTE: Please be aware that when casting via Chromecast, the WP-4500K must connect to the internet. IV-19. Castcode Control The Castcode Control page allows users to set castcode to prevent unauthorized casting.
IV-20. Upgrade The Upgrade page allows users to update WP-4500K firmware. NOTE: RX must connect to the internet. IV-21. Wi-Fi Diagnostic Tool The Wi-Fi Diagnostic Tool allows users to easily test TX wireless networks and its corresponding information. Please tap the “Collect TX’s signal” button to establish the connection.
Auto Channel Selection: The Auto Channel Selection scans all available channels and connects to the channel with the best signal. Tap the “Apply and Reboot” button to start scanning the channels. Connection Quality Test: In this page you can test the TX network connection by tapping the “Stat Test” button.
Throughput Test: The Throughput Test page allows users to use the tool to analyze WP-4500K networks throughput performance.
Manual Test: The Manual Test page allow users to manually adjust the bandwidth to check the throughput of your WP-4500K. Tap the “Start Manual Test” button to start the testing.
42
Wi-Fi Band Setup: The Wi-Fi Band Setup page allows users to set the Wi-Fi channel before testing. Tap the Apply button to save the changes.
IV-22. Multicast You can broadcast to multiple RX by turning on the Multicast function in this page. IV-23. Download Pairing File The Download Pairing File page allows users to download the pairing file from the RX. You can save the pairing file in USB disk and plug into the TX for pairing. IV-24. Reboot The Reboot page allows users to remotely reboot the RX.
IV-25. Reset to Factory Default The Reset to Factory Default page allows users to remotely reset RX, TX or RX+TX to factory default settings. V. Connecting the WP-4500K via Smatrphone App You can connect the WP-4500K via “Google Home” in Android and iOS “AirPlay or Screen Mirroring”. IV-1. Android OS Please follow the steps below to connect your WP-4500K with Android phone via “Google Home” App. 1. Download and install “Google Home” App from Play Store.
Please make sure your RX connects to the Internet when using “Google Home” App. 1. Connect your RX to the Internet with an Ethernet cable. 2. Connect the SSID “Edimax_WHDMI” from your Android phone and enter the default password via RX landing page. IV-2. iOS Please follow the steps below to connect your WP-4500K with iOS phone via “Screen Mirroring” or “AirPlay Mirroring”. 1. Connect the SSID “Edimax_WHDMI” from your iOS phone and enter the default password via RX landing page. 2.
NOTE: For more details how to add devices on “Screen Mirroring” or “AirPlay Mirroring”, please refer to the instructions via internet. VI. Applications & Operation Please follow the steps below to mirror your screen to the monitor. 1. Follow the instructions on “Hardware Installation” Chapter to set up the WP-4500K projector system. 2. Connect the SSID “Edimax_WHDMI” from your laptop network Wi-Fi and enter the via RX landing page. 3. You will see the image displays on your monitor as below.
Icon/Item Description This icon shows the Airplay status ( activated or deactivated) This icon shows the RX paring and connection status. The number (2) shows the total number of TX that are connected to the RX. This icon shows the Wi-Fi signal status (connected or disconnected) This icon shows the RJ45 port connection status (connected or disconnected) Direct Link IP RX’s IP address. 4. Press the main button on TX to establish a connection with your laptop.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries Not Intended for Use None EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Wireless transmitter Model No.: WP-4500TX The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : ETSI EN 301 893 V2.1.1 (2017-05) EMC : ETSI EN 301 489-1 V2.2.0 (2017-03) ETSI EN 301 489-17 V3.2.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Wireless receiver Model No.: WP-4500RX The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) EMC : ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17 V3.2.
