User manual

40
3‐2‐5L2TP

Select“L2TP”ifyourISPisprovidingyouInternetaccessviaL2TP(Layer‐2Tunneling
Protocol).
IfyourISPisprovidingyoudynamicIPaddresses,select“ObtainanIPaddress
automatically”.IfyourISPisprovidingyouastaticIPaddress,select“UsethefollowingIP
address”.



ItemName Description
HostName Inputthehostnameofyourcomputerhere.Thisisoptional
andonlyrequiredifyourISPasksyoutodoso.
MACAddress IfyourISPonlypermitscomputerswithcertainMAC
addressestoaccesstheInternet,inputyourcomputer’sMAC
addresshere.Press“CloneMacaddress”tofilltheMAC
addressfieldwithyourcomputer’sMACaddress
automatically. 
IPAddress InputtheIPaddressassignedbyyourISPhere.
SubnetMask InputthesubnetmaskassignedbyyourISPhere.
DefaultGateway InputthedefaultgatewayassignedbyyourISPhere.Some
ISPsmaycallthis“DefaultRoute”.
DNSAddress Select“UsethefollowingIPaddress”ifyourISPrequiresthat
youdoso.
DNSAddress1
and2
EntertheprimaryandsecondaryDNSaddressesassignedby
yourISPhere.
EnableDual‐WAN
Access
Checkthe“EnableDual‐WANAccess”boxifyourISPrequires
youtodoso.