User Manual

39
Power Line
Frequency
Select the frequency of power line of the place you’re using this IP
camera. This will help to reduce the flicker of certain lights in the
image.
Condition
(ABW)
Select the condition that you’ll be using this IP camera from
dropdown menu.
- Outdoor: Outdoor environment using.
- Auto: IP camera will adjust its parameters automatically.
- Night: You’ll be using this IP camera in dark places where lights
are insufficient.
- Tungsten: Low color temperature environment using.
WDR
Wide Dynamic Range:
The function is intended to provide clear images even under back
light circumstances where intensity of illumination can vary
excessively, namely when there are both very bright and very dark
areas simultaneously in the field of view of the camera. WDR
enables the capture and display of both bright and dark areas in the
same frame, in a way that there are details in both areas, i.e. bright
areas are not saturated, and dark areas are not too dark.
IR-cut
(Day/Night)
An IR-cut filter is built in this IP camera to reduce the effect of IR
lights (which will change the color of image and makes it looks
different than what you see through your eye), and most of IR lights
are coming from sunlight.
You can select the behavior or IR-cut filter:
- Auto: IR filter will act automatically. If you don’t know if you
should use IR filter, select this option.
- Always ON(B/W): IR filter is always on.
- Always OFF(Color): IR filter is always off.
Day
The IR-cut (Day/Night) function above is the main Day/Night
setting. This vandal dome camera supports user to set the Day time
manually here. User can define the timing of switching IR filter as
need.
When you finish with above settings, click ‘Apply’ button to save changes.