User Manual

11
5. Connect all your cables to their respective terminals. Insert your micro
SD/SDHC card for option. Please see the location refer to the chart in
chapter 1-1.4.
6. If this camera is connected to a PoE switch then the device can be
powered on without using the power adapter.
7. Repower on the camera and refer to the following procedures in
chapter 2 to access and configure it.
8. If everything works fine, you can put the camera on the wall or ceiling
by using the screw in the tools package.
9. If local storage is required then insert micro SD card in the slot then the
camera can detect the card and enable the UI of SD card.
A
B